86subaru Posted February 8, 2004 Share Posted February 8, 2004 my hi speed of the wipers does not work at all, replaced the switch , replaced the wiper motor , what else could it be ? it is 88 full time 4wd a/t wagon turbo , Link to comment Share on other sites More sharing options...
Skip Posted February 8, 2004 Share Posted February 8, 2004 Could be a broken wire at the connector on the motor. Do they wipe when you push the squirter button? Hope this helps. Link to comment Share on other sites More sharing options...
86subaru Posted February 8, 2004 Author Share Posted February 8, 2004 yes they do Link to comment Share on other sites More sharing options...
Skip Posted February 8, 2004 Share Posted February 8, 2004 Guess you didn't have time to check the connector Get out your DMM, get a wiring diagram and start tracing. Good luck and your welcome. Link to comment Share on other sites More sharing options...
MilesFox Posted February 8, 2004 Share Posted February 8, 2004 i wished i could have lent a hand during the troubleshoot, but i was busy with the clutch on the other wagon. but we plugged in a different motor, and replaced the switch to no avail. jim has the haynes book, and i am handy with the electrical troubleshoot, so i will have to take a look next time i come down. i bet we can fixit by a cleverly places jumper wire, once i peep the schematics Link to comment Share on other sites More sharing options...
86subaru Posted February 10, 2004 Author Share Posted February 10, 2004 yes the connector is good Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now