CHIM Posted January 23, 2010 Share Posted January 23, 2010 Ok, so im getting close to finishing a megasquirt install on my nephews car, Anyone here using a megasquirt I that might have fuel maps for the EA-82 T's? Maybe know a good place look? I am fully prepared to build one from scratch but wouldn't mind taking the lazy way and usuing someone else's homwork as a starting point. Link to comment Share on other sites More sharing options...
eulogious Posted January 23, 2010 Share Posted January 23, 2010 I am interested to see how this turns out for you. You didn't happed to document this when you were doing it did you? I would be very interested to see how you did it, and to see the results! Link to comment Share on other sites More sharing options...
bluto5 Posted January 23, 2010 Share Posted January 23, 2010 I'll post mine next time I'm in front of my computer. Edis ignition, bigger injectors and a freakish ic also a downpipe on a stock turbo. Sam Link to comment Share on other sites More sharing options...
CHIM Posted January 23, 2010 Author Share Posted January 23, 2010 I am interested to see how this turns out for you. You didn't happed to document this when you were doing it did you? I would be very interested to see how you did it, and to see the results! I havn't really started yet but i think i might, Im building my own harness from scratch so i should be able to give ya somthin. Link to comment Share on other sites More sharing options...
JWX Posted January 24, 2010 Share Posted January 24, 2010 (edited) http://www.diyautotune.com/tech_articles/how_to_megasquirt_your_subaru_rx_turbo.htm I would recommend not using the factory engine harness though, as it will cause you nothing but headaches. Either way, using the settings in that article will start the motor at the very least. I would not recommend using someone else map, as it could be nothing but problems. Far easier to just start frm scrach. Edited January 24, 2010 by JWX Link to comment Share on other sites More sharing options...
CHIM Posted January 24, 2010 Author Share Posted January 24, 2010 http://www.diyautotune.com/tech_articles/how_to_megasquirt_your_subaru_rx_turbo.htm I would recommend not using the factory engine harness though, as it will cause you nothing but headaches. Either way, using the settings in that article will start the motor at the very least. I would not recommend using someone else map, as it could be nothing but problems. Far easier to just start frm scrach. Oh no, im definatly not using the stock harness, made my own, just keep a few inches as pigtails. Im hoping to have her running tomarrow. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now