suberdave Posted January 24, 2010 Share Posted January 24, 2010 So the time has come to build a new engine for my car, not because the old engine has anything wrong with it, but just becaues i want to build a new engine for my car with more torque... Hopeing for a quick spooling high torque engine with this one... Specs: 2005 EJ257 Block, crank, and rods 1997 STI EJ20K Heads (Pollished Intake Ports) JE Deep Dish Pistons\ STI Head Gaskets / will give me 8.75:1-8.80:1 compression ratio 1997 STI EJ20K Cams 1996 EJ20G intake manifold (ported and painted) and wiring 1996 EJ20H Timing Belt Covers 2003 EJ207 VF37 Twin Scroll Turbo 1" Intake Spacers to allow front inlet turbo Phenolic intake spacers EJ20K Power Steering Pump ViPEC standalone ECU (Currently in the car) ARP Head Studs Gates HP Timing Belt Excedy Twin Disc clutch Custom Built -6 AN Parrallel Fuel Rails Sard Fuel Pressure Regulator its all going into this car 1988 GL-10 Wagon. currently has a 96 WRX EJ20G tuned at 293WHP 275 WTQ. -=Suberdave=- www.suberdave.com Link to comment Share on other sites More sharing options...
monstaru Posted January 25, 2010 Share Posted January 25, 2010 sick..........some time in the garage does a daddy good.:grin:can't wait to see how fast THIS one is......cheers,brian Link to comment Share on other sites More sharing options...
thatswhatshesaid Posted January 26, 2010 Share Posted January 26, 2010 If you don't mind me asking...what kind of $$ do you have into those parts? I'm looking to put some kind of turbo motor together and your setup looks ridiculous! Link to comment Share on other sites More sharing options...
Jibs Posted January 26, 2010 Share Posted January 26, 2010 I call dibs on the - old - engine!! Link to comment Share on other sites More sharing options...
thatswhatshesaid Posted January 26, 2010 Share Posted January 26, 2010 I was just going to say that! It's exactly what I want! I call dibs on the - old - engine!! But seriously...are you selling the old engine? Link to comment Share on other sites More sharing options...
suberdave Posted January 27, 2010 Author Share Posted January 27, 2010 I wont be saleing the old engine, i will keep it in the gerage so if i blow this one up, i can have it back up and running in a few days... i dont like to look at how much money i have into my car. i like to look at it like this... the whole car probably cost less than a used 04ish STi would cost me... and its paid off, and full coverage insurance cost me less than $80 a month... -=Suberdave=- Link to comment Share on other sites More sharing options...
suberdave Posted January 27, 2010 Author Share Posted January 27, 2010 update: got the heads on and the timing componits done. intake and exhaust on. Link to comment Share on other sites More sharing options...
Gloyale Posted January 27, 2010 Share Posted January 27, 2010 it's just too nice man. nobody has anything to say but Link to comment Share on other sites More sharing options...
PoorManzImpreza Posted January 28, 2010 Share Posted January 28, 2010 (edited) it's just too nice man. nobody has anything to say but more like: :slobber::slobber: Kaz Edited January 28, 2010 by PoorManzImpreza Link to comment Share on other sites More sharing options...
Pooparu Posted January 28, 2010 Share Posted January 28, 2010 Wow, this thing should be a monster. Link to comment Share on other sites More sharing options...
turbo5speedgl Posted January 28, 2010 Share Posted January 28, 2010 wow love this car want to do that to mine but dont have the guts to even try to reseal my engine yet. Link to comment Share on other sites More sharing options...
Zefy Posted January 29, 2010 Share Posted January 29, 2010 i spy twinscroll. ballin'... Link to comment Share on other sites More sharing options...
ishada Posted February 4, 2010 Share Posted February 4, 2010 what all was invloved in getting the orginal motor in I searched and checked your site but couldnt find a whole awful lot. I am putting my second ea82t in my car now but if it goes would like to make the switch. Anyway nice build and that thing shoot haul serious rump roast. Link to comment Share on other sites More sharing options...
plodder Posted February 9, 2010 Share Posted February 9, 2010 Nice work Dave!!!!!!!!, You've been on this a while. I see the tranny you sold me in the background:). Thanks so much for that by the way, good to see someone do what they love, and do it so well. Good luck in the testing, may it be more than you hope, and more durable than anyone can dream!!!!! Link to comment Share on other sites More sharing options...
PoorManzImpreza Posted February 18, 2010 Share Posted February 18, 2010 ...and when you get board of the VF ;-) http://forums.nasioc.com/forums/showthread.php?t=1934499 Kaz Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now