Kwhistle Posted January 27, 2010 Share Posted January 27, 2010 Was changing front oxygen sensor on my 98 OBW, and noticed this hose. Comes off the top of engine block (don't know what the specific part it's attached to is), and just hangs there. The pic is from the passenger side. Is it supposed to be like that? Link to comment Share on other sites More sharing options...
nipper Posted January 27, 2010 Share Posted January 27, 2010 If someone doesnt chime in, trace it back to its source and take a pic, then I can tell you. Otherwise wait till the sun comes up and I'll look on mine. nipper Link to comment Share on other sites More sharing options...
johnceggleston Posted January 27, 2010 Share Posted January 27, 2010 is that the vacuum line that attaches to the bottom, about the middle, of the air intake half way between the filter box and the throttle body. you know, the one that slips off when you check your air filter and it makes it so the car will not idle, wants to die, until you reattach it. the other end goes to ..... anyone. Link to comment Share on other sites More sharing options...
nipper Posted January 27, 2010 Share Posted January 27, 2010 One goes to thecrankcase one comes from the valve covers. Im guessing that he isnt stalling its from the valve covers. nipper Link to comment Share on other sites More sharing options...
Kwhistle Posted January 27, 2010 Author Share Posted January 27, 2010 Thanks, will definitely take some pics tomorrow. Link to comment Share on other sites More sharing options...
Gloyale Posted January 27, 2010 Share Posted January 27, 2010 Looks like the passenger side head breather. It is probably disconnected in the back, where it attaches to the big black box. Link to comment Share on other sites More sharing options...
Kwhistle Posted January 28, 2010 Author Share Posted January 28, 2010 So here's a pic of where it's coming out of: Now where do I connect the other end? Link to comment Share on other sites More sharing options...
nipper Posted January 28, 2010 Share Posted January 28, 2010 There is one of those from both sides of the engine. They should connect to a T then connect to the snorkus (air intake box/hose) It will be under the box on the pass side, if i recall correctly. nipper Link to comment Share on other sites More sharing options...
Kwhistle Posted January 29, 2010 Author Share Posted January 29, 2010 Hi nipper, Would that be the one labeled "blow-by hose" on the pic below? Should it connect to the box that I marked with red arrows? Thanks. Link to comment Share on other sites More sharing options...
nipper Posted January 29, 2010 Share Posted January 29, 2010 I will say yes for now. Its too cold and dark for me to look at the specimen in my driveway Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now