Scott in Bellingham Posted February 5, 2010 Share Posted February 5, 2010 (edited) time for a change, since I chopped off the back I havent liked any of the configurations I have, I didnt like the spare tire on the back as I couldnt see out the back to back up, I didnt like the hatch bolted on without being able to open it a sthen I had to reach threw the side door to get the gear and I didnt care for the back being like a pickup caus all my stuff got rained on , so in the shop I go , will end up having a workable hatch,no stock lights at the rear corners and some better protection and clearence at the rear also other stuff to do put the dash back in as I havent had one since I replaced the heater core, replace some or all the doors with straight ones of many colors, replace the engine as this ones got a bad blown head gasket at the same time add some Delta torque Cams to that Webered EJ22 may even paint this bad boy bright yellow here it is stock first mod I really like this look pickup style the future Edited February 7, 2010 by Scott in Bellingham pics Link to comment Share on other sites More sharing options...
one eye Posted February 5, 2010 Share Posted February 5, 2010 That looks pretty dang cool like that Scott!!! +1 on this set up What about a power plant in this thing? Is there a new one in the works? Jeff Link to comment Share on other sites More sharing options...
TeamCF Posted February 5, 2010 Share Posted February 5, 2010 Nice. That'll be nice getting the rear hatch function back. Link to comment Share on other sites More sharing options...
one eye Posted February 6, 2010 Share Posted February 6, 2010 Scott you could move that bumper up closer too, that will make real good, no dragging any thing............ Jeff Link to comment Share on other sites More sharing options...
SoobieDoo Posted February 6, 2010 Share Posted February 6, 2010 I likes it! It'll be good to see the Ol' white fixed up. Link to comment Share on other sites More sharing options...
one eye Posted February 7, 2010 Share Posted February 7, 2010 Any updated pics of the yet Scott? I cant wait to see what it looks like!!! Jeff Link to comment Share on other sites More sharing options...
Scott in Bellingham Posted February 7, 2010 Author Share Posted February 7, 2010 Any updated pics of the yet Scott? I cant wait to see what it looks like!!! Jeff here ya go I just went out and took it, hopin to change out moter this week maybe finish it by saturday , need to find some small tail light I can hide up in that hole Link to comment Share on other sites More sharing options...
one eye Posted February 8, 2010 Share Posted February 8, 2010 That looks good, It will serve you so much better too!!! Jeff Link to comment Share on other sites More sharing options...
SoobieDoo Posted February 8, 2010 Share Posted February 8, 2010 (edited) Looking goooooooooood! I like your idea of replacing the doors with as many colors as possible. New fenders as well!?! Edited February 8, 2010 by SoobieDoo re-read da thread Link to comment Share on other sites More sharing options...
The Dude Abides Posted February 8, 2010 Share Posted February 8, 2010 Is it just me, or does it look like you could get some coupe glass to fit in the back there. Link to comment Share on other sites More sharing options...
Yo'J Posted February 9, 2010 Share Posted February 9, 2010 You could cut lexan on your lathe no oil and just caulk it in. Should cut just fine maybe speed it up a bit. I make jigs on my router, same principal. Stuff glues real well with the right glue, fish tank quality for the corners. I buy scrap per pound for jigs at the plastic shops, you might do better up there. Link to comment Share on other sites More sharing options...
Scott in Bellingham Posted March 14, 2010 Author Share Posted March 14, 2010 got it hooked up and added the new lights stil have some metal and a window to add picked up a peice o plexi Link to comment Share on other sites More sharing options...
one eye Posted March 14, 2010 Share Posted March 14, 2010 Looks good Scott, Have you done the motor yet, or does it still need it? Jeff Link to comment Share on other sites More sharing options...
Scott in Bellingham Posted March 14, 2010 Author Share Posted March 14, 2010 Looks good Scott, Have you done the motor yet, or does it still need it? Jeff no I have the moter just need to do it hope to geter done so I could wheel with you when Butters gos out hte first time Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now