Steve W. Posted February 15, 2010 Share Posted February 15, 2010 Hi all, Say I;ve looked in several locations, and have failed to find the old thread on 4.11 front dif. conversion. I.ve got both of my D/R tranys. torn down on the bench & it seems a good time to try this swap. A friend has offered me a donor. Trany. bad but dif. good. Can anybody aim me? Thanks, S. Link to comment Share on other sites More sharing options...
The Beast I Drive Posted February 15, 2010 Share Posted February 15, 2010 here ya go. You have to start with a RX tranny. Its a bolt-in conversion as long as you use the Legacy viscous center diff and rear half. If you want to keep the RX locking center diff you need to have the 4.11 pinion gear welded on to the RX pinion shaft by a good machine shop. http://ultimatesubaru.org/forum/showthread.php?t=106140&highlight=tranny+teardown -Bill Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now