swampbrat Posted February 17, 2010 Share Posted February 17, 2010 What's everyone using and how do they like it? I have seen a lot of great ideas for gauge locations on several threads. I would like to put the boost gauge next to the windshield to keep the trip computer and clock readout. I really like superdave's setup. What car was that originally made for? -or is it a generic one? Link to comment Share on other sites More sharing options...
Turbone Posted February 17, 2010 Share Posted February 17, 2010 Mine is for a 02 WRX. Had to trim the bottom to make it fit, but the top is fine. Link to comment Share on other sites More sharing options...
mcbrat Posted February 17, 2010 Share Posted February 17, 2010 I trimmed the bottom as well for my Brat. I think this was for a mid 90's Imp. Link to comment Share on other sites More sharing options...
subiekid Posted February 17, 2010 Share Posted February 17, 2010 Early honda crx (89-91 I believe) pods fit very well without trimming as well. I can snap a picture of mine if you want. Atm 20400 is the summit part number for the one I used. it is a 2 place pod, but I think a 3 place is available as well. Scott Link to comment Share on other sites More sharing options...
Caboobaroo Posted February 17, 2010 Share Posted February 17, 2010 Mine's the best. Came from a WRX and I paid almost nothing for it. I trimmed the top a bit because it doesn't fit perfect (I can be a stickler when it comes to perfection) so I made it fit perfect, along with trimming the bottom. Link to comment Share on other sites More sharing options...
swampbrat Posted February 17, 2010 Author Share Posted February 17, 2010 Thanks guys! I'll check on ebay later today. McBrat , I noticed you have a gas gauge in yours. The fuel level does not work on either of my cars - one digital the other analog. Is that gauge hooked to the stock sender? How do you like it? I had a lot of advice on previous threads - apparantly I have a bad module in the cluster. Link to comment Share on other sites More sharing options...
Numbchux Posted February 17, 2010 Share Posted February 17, 2010 I just went to advance auto parts and picked up a generic one. stuck my AFR gauge in it, grabbed some double-sided tape, and called it a day. I never took a picture of it, because it really wasn't anything to look at. obviously aftermarket, but it wasn't ugly either. Link to comment Share on other sites More sharing options...
mcbrat Posted February 17, 2010 Share Posted February 17, 2010 Thanks guys! I'll check on ebay later today. McBrat , I noticed you have a gas gauge in yours. The fuel level does not work on either of my cars - one digital the other analog. Is that gauge hooked to the stock sender? How do you like it? I had a lot of advice on previous threads - apparantly I have a bad module in the cluster. Mine's hooked up to a GM sender unit in a fuel cell. you need to find a gauge that matches up to the sender electrically, or put in an aftermarket matched set. the Subaru senders are almost complete opposite electrically from the GM units... so I couldn't use my stock gauge... Link to comment Share on other sites More sharing options...
nick1208 Posted July 31, 2015 Share Posted July 31, 2015 sorry to bump an old thread, wondering if the CRX pillar will fit with the automatic seatbelt setup the Loyale has. I assume these pillar recommendations are for a model without automatic seatbelts? Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now