SUBARU3 Posted February 10, 2004 Share Posted February 10, 2004 Quick question: I have 2 master cylinders for Gen 1 vehicles. One is stamped 13/16 and the other 3/4. Both "look" identicle. Are these both interchangable on the car? Any profound reason why they would not each be able to be used interchangably? What would be inpacted by using 13/16 on a car with an original 3/4? Thanks!!!! Todd Link to comment Share on other sites More sharing options...
Setright Posted February 10, 2004 Share Posted February 10, 2004 Could be flow related. Like the 13/16 flows more fluid, and is designed to work with larger pistons. Just my thoughts, not facts.. Link to comment Share on other sites More sharing options...
ShawnW Posted February 10, 2004 Share Posted February 10, 2004 I dont remember the answer but I think this is explained in the How to keep your Subaru alive book. Link to comment Share on other sites More sharing options...
Qman Posted February 10, 2004 Share Posted February 10, 2004 The difference is in bore size. I believe all the rest is the same. I'm sure you can use the larger one in place of the smaller one. It is only 1/16" difference in bore. Link to comment Share on other sites More sharing options...
SUBARU3 Posted February 11, 2004 Author Share Posted February 11, 2004 Thanks for the feedback! Todd Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now