SuperchargedRS Posted February 21, 2010 Share Posted February 21, 2010 When heavily accelerating a EJ22 5spd pushbutton 4wd loyale I get a very faint clicking (about 1 click every half second or so) from 1000 - 2500 RPM in 2nd gear? Oil pres OK I can turn the wheel all the way to the lock and drive in circles (both R and L) w/o any noise thoughts? Thanks Link to comment Share on other sites More sharing options...
Numbchux Posted February 21, 2010 Share Posted February 21, 2010 ONLY in second gear? I would suspect something with that gear or synchro. Link to comment Share on other sites More sharing options...
SuperchargedRS Posted February 21, 2010 Author Share Posted February 21, 2010 It's really faint, it may be in other gears as w ll. Otherwise 2nd seems fine. Link to comment Share on other sites More sharing options...
MilesFox Posted February 21, 2010 Share Posted February 21, 2010 axles? rear axles maybe? i have had axles that would click under accelertion, but not while turning Link to comment Share on other sites More sharing options...
obk25xt Posted February 21, 2010 Share Posted February 21, 2010 I know this may be a longshot but.... Speedo cable hooked up? In mine it's not and it was resting on something behind the dash and making a slight clicking noise, couldn't be heard in first so much cause it wasn't spinnin so fast and by the time I got into third or above the road/engine noise nearly drowned it out. Unlikely but possibly your answer. Thanks, Spencer Link to comment Share on other sites More sharing options...
SuperchargedRS Posted February 22, 2010 Author Share Posted February 22, 2010 The speedo is connected and I noticed a slight clicking in other gears as well today (still very faint). Axles? I've also noticed my pass side valve cover has developed a significant leak. Link to comment Share on other sites More sharing options...
mccrayk Posted February 22, 2010 Share Posted February 22, 2010 i have the same thing happeing on my xt, i can hear it even in neutral... im thinking the axle or the wheel berring.. Link to comment Share on other sites More sharing options...
SuperchargedRS Posted February 22, 2010 Author Share Posted February 22, 2010 Nothung in neutral and the bearings were just done (the ones that needed doing that is). Hmm? What would be the other signs if it was the: Engine? Tranny? Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now