88gl_kody Posted March 12, 2010 Share Posted March 12, 2010 hey so the u-joint in the very front driveline in my 88gl 4wd went out. i went to napa today and they told me that the u-joints are unreplacable and it was 600 bucks for the driveline. do i have any options like drilling the driveline out were the u-joints go and get a bigger sized u-joint?? i have little experince with this type of thing so any help helps!! Link to comment Share on other sites More sharing options...
GeneralDisorder Posted March 12, 2010 Share Posted March 12, 2010 They can be replaced - it takes a little work. You have to grind out the stakes to remove the old one's and then they make a retro-fit kit to replace the u-joints with a regular non-staked unit. Call up Rockford CV and talk to them. Also most driveline shops can do it. The yoke's are very soft so you have to be careful about how it's done. The joint is the same as some model of Toyota among other things. If you run some searches on the board here you should come up with lots of threads discussing this. By far the easiest solution is to just source a used driveline - they are cheap and rarely fail so it's pretty easy to find a good replacement. Shoot some grease into the joints with a needle and be on your way for less than $50 and almost no work. GD Link to comment Share on other sites More sharing options...
88gl_kody Posted March 15, 2010 Author Share Posted March 15, 2010 sweet thanks for the help im getting on that in the next few days. Link to comment Share on other sites More sharing options...
mdjdc Posted March 16, 2010 Share Posted March 16, 2010 There is a JY near me with a loyale in it. I can check for you if you'd like me too. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now