kanurys Posted March 28, 2013 Share Posted March 28, 2013 That's what it is at the ECU in my spreadsheet and on my car. Link to comment Share on other sites More sharing options...
JacksonRally Posted March 28, 2013 Author Share Posted March 28, 2013 And the rest of that nonsense is for emissions, which I may need to get the rest of that stuff. Not sure yet how the smog nazis are going to treat this one. Link to comment Share on other sites More sharing options...
kanurys Posted March 28, 2013 Share Posted March 28, 2013 At least our wagons will be classic cars in a few years Link to comment Share on other sites More sharing options...
JacksonRally Posted March 28, 2013 Author Share Posted March 28, 2013 Yeah true. Not sure if California is still doing the rolling 30? Link to comment Share on other sites More sharing options...
tractor pole Posted March 28, 2013 Share Posted March 28, 2013 And the rest of that nonsense is for emissions, which I may need to get the rest of that stuff. Not sure yet how the smog nazis are going to treat this one. I would assume since your wagon was not OBD-II originally, they would look for a CEL and do the tail pipe sniffer, and if it passed it wouldn't matter. However it is California and after hearing the nightmare that my brother had getting his Audi Coupe Quattro to pass smog I would only own an old car in CA... Good Luck! I am keeping an eye on this fuel temp and tank pressure issue as well, I would also like to have the check engine light off. Link to comment Share on other sites More sharing options...
kanurys Posted March 28, 2013 Share Posted March 28, 2013 I think there is a need for fuel tank temp functionality. It effects cold starts, somehow. I'm not sure exactly how because it's hard to test. We'll keep plugging away at it... Link to comment Share on other sites More sharing options...
JacksonRally Posted March 29, 2013 Author Share Posted March 29, 2013 Received reverse switch and electric speedo sensor today. I still need the intermediate cord between speedo sensor and harness. Link to comment Share on other sites More sharing options...
JacksonRally Posted April 1, 2013 Author Share Posted April 1, 2013 I would assume since your wagon was not OBD-II originally, they would look for a CEL and do the tail pipe sniffer, and if it passed it wouldn't matter. However it is California and after hearing the nightmare that my brother had getting his Audi Coupe Quattro to pass smog I would only own an old car in CA... Good Luck! I am keeping an eye on this fuel temp and tank pressure issue as well, I would also like to have the check engine light off. This I'd what I'm hoping for. I would like to just bring it in and smog it like it was an 87. Just hope the guy dont know its now obd 2. Link to comment Share on other sites More sharing options...
JacksonRally Posted April 4, 2013 Author Share Posted April 4, 2013 Fuel temp is hooked up and no more code. The blue/black wire was correct. Now im trying to figure out the low idle. I set the tps at .5v. Gonna put in another iacv and see what happens. I also have a slight hesitation that I'm hoping is fuel filter. Link to comment Share on other sites More sharing options...
JacksonRally Posted April 5, 2013 Author Share Posted April 5, 2013 Put the original iacv back in, cleaned and now she's running proper. Cruised around a little with the a/c blasting and she never missed a beat. I will wire headlights today and try then out tonight! Link to comment Share on other sites More sharing options...
JacksonRally Posted April 8, 2013 Author Share Posted April 8, 2013 I had a pretty busy weekend, started on the winch bumper, wired the headlights and dropped the new motor into my brothers Forester. The GL has almost 500 miles on her now. I still have one reoccurring code for an o2 sensor. Its nice to cruise in traffic at 70/75 mph with A full car. Still has a few quirks but its getting there. Struts/shocks need to be addressed asap. Link to comment Share on other sites More sharing options...
JacksonRally Posted April 10, 2013 Author Share Posted April 10, 2013 Bumper teaser Link to comment Share on other sites More sharing options...
Ibreakstuff Posted April 10, 2013 Share Posted April 10, 2013 Rotate the picture to the left and it looks like a smile. Link to comment Share on other sites More sharing options...
JacksonRally Posted April 11, 2013 Author Share Posted April 11, 2013 Rotate the picture to the left and it looks like a smile. Its happy happy happy Link to comment Share on other sites More sharing options...
JacksonRally Posted April 11, 2013 Author Share Posted April 11, 2013 Link to comment Share on other sites More sharing options...
JacksonRally Posted April 11, 2013 Author Share Posted April 11, 2013 With the added weight of the winch the front end came down 3/16". The bumper itself weighs 30lbs. Link to comment Share on other sites More sharing options...
bratman18 Posted April 11, 2013 Share Posted April 11, 2013 Is that with stock springs? Link to comment Share on other sites More sharing options...
JacksonRally Posted April 11, 2013 Author Share Posted April 11, 2013 Is that with stock springs? Yes Link to comment Share on other sites More sharing options...
kanurys Posted April 11, 2013 Share Posted April 11, 2013 What thickness of pipe did you use for that bumper? Link to comment Share on other sites More sharing options...
rpholz Posted April 11, 2013 Share Posted April 11, 2013 What's with the gangsta lean? Looks good! Link to comment Share on other sites More sharing options...
superu Posted April 12, 2013 Share Posted April 12, 2013 What's with the gangsta lean? Looks good! lighting Link to comment Share on other sites More sharing options...
rpholz Posted April 12, 2013 Share Posted April 12, 2013 Ah, i see. looks MUCH more dramatic on my phone Link to comment Share on other sites More sharing options...
JacksonRally Posted April 12, 2013 Author Share Posted April 12, 2013 What thickness of pipe did you use for that bumper? .095 Link to comment Share on other sites More sharing options...
JacksonRally Posted April 12, 2013 Author Share Posted April 12, 2013 Finally got the 02 wrx seats in. Took a bit of work but way more comfortable. Link to comment Share on other sites More sharing options...
JacksonRally Posted April 12, 2013 Author Share Posted April 12, 2013 What's with the gangsta lean? Looks good! The little factory trim piece under the grill has a slight radius and is also bowed. It stumped me for a bit to figure out what looked a little funny. It makes the top bar look different at different angles. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now