jackbombay Posted March 24, 2010 Share Posted March 24, 2010 So I have a couple fault codes, 11 and 13, which are no referance pulse and no position pulse, the car still runs ok though. From reading around it seems like those codes are usually accompanied by poor running. Can the crank angle sensor go bad enough to throw a code, but not bad enough to notably affect how well the engine runs? The Check Engine light came on a few days ago so I have not filled up since it came on to know how the MPGs are. Link to comment Share on other sites More sharing options...
Cougar Posted March 24, 2010 Share Posted March 24, 2010 Those codes refer to a possible circuit problem with the CAS sensor inside the disty. Link to comment Share on other sites More sharing options...
jackbombay Posted March 24, 2010 Author Share Posted March 24, 2010 Hmm, so open up the dizzy and look for anything blatantly wrong? Link to comment Share on other sites More sharing options...
Cougar Posted March 24, 2010 Share Posted March 24, 2010 I doubt you will see anything wrong if you do that. You might try disconnecting the connector to the disty and reconnect it in case there is a bad connection there. Link to comment Share on other sites More sharing options...
subiemech85 Posted March 25, 2010 Share Posted March 25, 2010 REPLACE the timing belt Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now