victor53 Posted April 15, 2010 Share Posted April 15, 2010 Ive got a 1985 brat if i cant find any to buy .. then i will have to find a place to build and paint me up a nice red roll bar and A bar so pictures would help me i can figure our measurements i will need ... My topper raises up so i can have one a few tinces taller than my cab. Link to comment Share on other sites More sharing options...
mcbrat Posted April 15, 2010 Share Posted April 15, 2010 this place makes them for Gen2 Brats... http://www.truckrollbar.com/ here's a pic of one... http://www.indysworld.com/sterling-bar.jpg Part# 310 @ $405.00 + motor freight also, if you can go here http://www.indysworld.com/80s/ and look at the brat paint color examples. there's probably a few pics of rollbars in there... in the General section there's also a page of push bar pics... here's a stock low bar... http://www.indysworld.com/vehicles/1982-brat-red/2003-brat-2.jpg and here's a stock high bar... http://www.indysworld.com/vehicles/1986-brat-ltblue/86bt-lb-19.jpg highbar and push bar... http://www.indysworld.com/vehicles/1986-brat-ltblue/86bt-lb-9.jpg Link to comment Share on other sites More sharing options...
ettev Posted April 15, 2010 Share Posted April 15, 2010 here's a pic of one... http://www.indysworld.com/sterling-bar.jpg Part# 310 @ $405.00 + motor freight Mick, is the Sterling bar in this picture yours? I just got one of these exact units! Just curious about the wiring for the Hella's. I'm doing the same thing. Just wire poked out thru a hole or did you do some kind of plastic looming around it? Link to comment Share on other sites More sharing options...
mcbrat Posted April 15, 2010 Share Posted April 15, 2010 Mick, is the Sterling bar in this picture yours? I just got one of these exact units! Just curious about the wiring for the Hella's. I'm doing the same thing. Just wire poked out thru a hole or did you do some kind of plastic looming around it? no, that's not mine... that's the picture Sterling just sent to me today.... Link to comment Share on other sites More sharing options...
victor53 Posted April 16, 2010 Author Share Posted April 16, 2010 Thanks guys i want a high bar but that one looks about 2 or 3 inchs too tall to fit under my topper ..wanna be able to use both but i almost never use my topper in the summer and just put it on and take it off once a year so maybe i will just get the ready made one .. I will call about a custom size. And i want them in red. I saw a picture of a white in the subaru headquarters or some wear of a white with red trim had a cool looking spoiler for above the cab also.. Gotta go look for that picture... Thanks guys Link to comment Share on other sites More sharing options...
victor53 Posted April 16, 2010 Author Share Posted April 16, 2010 just saw the peak in the attic red and white brat its and gen 1 mine is 1985 but same color scheme Link to comment Share on other sites More sharing options...
monstaru Posted April 17, 2010 Share Posted April 17, 2010 (edited) if 3 people got together and wanted to pay me to bend them up some, i could.i do not currently have the dies, but if i got 3 folks to pony up 200 apiece, i could buy the dies, their tubing, and bend'em out. i have a gen 2 brat local to test fit on. no gen 1... but they were originally 2 ", at least the several i have had , have been 2" .i found an old flange i had cut off once, downstairs. and all of the bars i have had through here, have been the same size.i have def. had gen1 and gen 2 pieces through here. i am just trying to add options . cheers, brian Edited April 17, 2010 by monstaru Link to comment Share on other sites More sharing options...
ettev Posted April 18, 2010 Share Posted April 18, 2010 Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now