Uberoo Posted April 17, 2010 Share Posted April 17, 2010 How to make half doors: STEP 1: acquire donor doors Step 2: mark your pattern on the doors Step 3: cut out pattern step 4: ??? step 5: go wheeling I decided I was going to make some half doors for my Ea81 toy just for the summer..So I stole some from my parts car.The driver side is a bit dented but who cares?It just got cut up anyway.The passenger side is straight but it has aluminum siding riveted to the bottom to cure some rust.So Far I have only cut out the driver side.I may have cut a bit to much because I think the flat panel sealing the gap on the door is going to be like right on top of the latch mechanism.I probably will need to notch out the plate for clearance.oh well.Ive only gut the driver side door out because I ran out of cutting disks for my grinder,and I haven't gotten any more yet.I do have a question for those of you that have done this mod: How did you set up the opening mechanism? I was thinking of using the stock latch rod, then moving the plastic up enough to get a nut started on the bottom of the rod to hold it in place.Then put something on the rod to press down on.Also how did you get the latch to stay in the unlocked position? I was thinking simply welding the lock rod to the door skin in the unlocked position would work best,unless anyone has a better idea? I might be able to get the doors finished up on sunday.Not sure though.saturday Im heading up to pull and save to round up some SFPI parts for the conversion.. Link to comment Share on other sites More sharing options...
eulogious Posted April 17, 2010 Share Posted April 17, 2010 Ask McBrat he did it recently: http://www.ultimatesubaru.org/forum/showthread.php?t=110563&highlight=half+doors Might be a little different than your setup, but you get the idea... Link to comment Share on other sites More sharing options...
Jibs Posted April 17, 2010 Share Posted April 17, 2010 Who needs half doors? Link to comment Share on other sites More sharing options...
yodannyc Posted April 17, 2010 Share Posted April 17, 2010 Jibs do you have a template for those? I was thinking about something close to that. Link to comment Share on other sites More sharing options...
Jibs Posted April 17, 2010 Share Posted April 17, 2010 I don't. I can take some closer pics and maybe some measurements for you if needed, but I had a buddy make them for me. Link to comment Share on other sites More sharing options...
Uberoo Posted April 18, 2010 Author Share Posted April 18, 2010 Jibs, tube doors would be nice but: I dont have anything to make decent looking tube doors.That and you actually have to go and buy steel... Link to comment Share on other sites More sharing options...
rxleone Posted April 20, 2010 Share Posted April 20, 2010 Who needs half doors? Holy hell that is one cracked dash!!! Link to comment Share on other sites More sharing options...
Jibs Posted April 20, 2010 Share Posted April 20, 2010 Yeah. That Brat had been sitting in a field for 3 years facing east. I got it for free, lifted it and drove it from reno to shelton washington on the same oil that was in it. Needless to say, it BARELY made it back to reno. Tis no more though., Link to comment Share on other sites More sharing options...
KoolKatKodyJack Posted May 19, 2010 Share Posted May 19, 2010 does the sand spray you when you turn? that happens to me if i poke my head out the window Link to comment Share on other sites More sharing options...
Jibs Posted May 19, 2010 Share Posted May 19, 2010 does the sand spray you when you turn? that happens to me if i poke my head out the window Not so much sand as much as rain and water. Driving through orwgon at 6am in a thunderstorm was an exciting voyage up to wcss. Link to comment Share on other sites More sharing options...
one eye Posted May 20, 2010 Share Posted May 20, 2010 Send Will a set of doors, he makes really nice one with cup holders...... That is 3eyedwagons work right there............... he does damn fine work. Jeff Link to comment Share on other sites More sharing options...
monstaru Posted May 20, 2010 Share Posted May 20, 2010 i wanna wheel that when i come over:grin:..... Link to comment Share on other sites More sharing options...
Uberoo Posted May 24, 2010 Author Share Posted May 24, 2010 I'm sorry Ive been slacking.Here is a pic of my half doors.I forgot to add cupholders in the doors so I will have to make some when I get the chance.I modified the factory linkage for the doors.To open them,simply press down on the linkage. EDIT: my engine is pulled so the radiator,overflow tank etc are sitting on the seats. Link to comment Share on other sites More sharing options...
MysteriousXTC Posted May 31, 2010 Share Posted May 31, 2010 this is the design I had been working on, kinda got side tracked and might be selling my wagon so I don' know if I will ever finish them... Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now