subaruguru Posted April 25, 2010 Share Posted April 25, 2010 (edited) Just wondering if it will fit i know anything is possible and the EZ30 motor will fit in the XT6 but then again that is a 6cyl car to begin with is the EG33 the same length? i think 220+ hp would be very fun in an RX sedan Rob. Edited April 25, 2010 by subaruguru Link to comment Share on other sites More sharing options...
Numbchux Posted April 25, 2010 Share Posted April 25, 2010 EG is by far the biggest subaru motor. the radiator will need to be moved forward quite a bit. the EG33 barely fits in an XT6 engine bay, which is already a few inches larger than an EA82 one. Link to comment Share on other sites More sharing options...
subaruguru Posted April 25, 2010 Author Share Posted April 25, 2010 i have no problem moving the rad it can go down and forward quite a bit the car will not have A/C so there is quite a bit of space to be used there. Rob. Link to comment Share on other sites More sharing options...
The Beast I Drive Posted April 25, 2010 Share Posted April 25, 2010 We could always move the radiator to the trunk and punch some sweet louvers in the decklid..... -Bill Link to comment Share on other sites More sharing options...
subaruguru Posted April 25, 2010 Author Share Posted April 25, 2010 (edited) i was more thinking extending the front of the car not much but it kinda looks funny. Rob. Edited April 25, 2010 by subaruguru Link to comment Share on other sites More sharing options...
kingbobdole Posted April 25, 2010 Share Posted April 25, 2010 The ez is not much longer then the stock ea. You'll have to move the fans but I bet it will fit. The ez is just a hair shorter then the xt6 er27 as I got much more room in my car. Link to comment Share on other sites More sharing options...
subaruguru Posted April 26, 2010 Author Share Posted April 26, 2010 ok so yeah im not going to make the nose longer just ruinsthe look of the car but i do plan on doing this i will go through all possibilitys most likly the radiator will be relocated to the front side of the core support if i cant find a way to do it i will just put a 2.2 in the RX and put the EG33 in an impreza but untell then I WILL CONTINUE RESEARCH!!! Rob. Link to comment Share on other sites More sharing options...
The Beast I Drive Posted April 26, 2010 Share Posted April 26, 2010 Radiator in the trunk..... -Bill Link to comment Share on other sites More sharing options...
subaruguru Posted April 26, 2010 Author Share Posted April 26, 2010 (edited) lol maby, maby but i would rather not.... BUT now that you have me thinking about it hmmm im going to start taking mesurments and drawing stuff up i have a few thoughts on this... but for now i went and got pics with the digital cam. Sitting patiently for me to rescue her. Rob. Edited April 26, 2010 by subaruguru Link to comment Share on other sites More sharing options...
bratman18 Posted April 26, 2010 Share Posted April 26, 2010 You got some work ahead of you just with cleaning!!! Hurry up and get that thing out so you can at least get started on that!!! Link to comment Share on other sites More sharing options...
subaruguru Posted April 26, 2010 Author Share Posted April 26, 2010 i know i already plan to remove the dash found a bunch of mouse ************ in the glove box but at the very least least it will be at the subaru show with a 2.2 in it untell i get everything for the EG swap. Rob. Link to comment Share on other sites More sharing options...
subaruguru Posted April 27, 2010 Author Share Posted April 27, 2010 got some photochopping nothing special but i think it would look good with something like this. louvers on the trunk for pushing air out..louvers on the back to let air in.. Rad. mounted in trunk frame with hoses to solid line to front of car... Rob. Link to comment Share on other sites More sharing options...
subaruguru Posted April 29, 2010 Author Share Posted April 29, 2010 ok so i have decided the rad will stay in the front even if i need to run a non subaru radiator im shure i can find one to fit up front with all the front mount intercoolers i have seen i know i can apply the same idea to a rad. thanks Rob. PS LINK TO BUILD THREAD http://www.ultimatesubaru.org/forum/showthread.php?t=111441 Link to comment Share on other sites More sharing options...
bheinen74 Posted April 29, 2010 Share Posted April 29, 2010 maybe a couple of the small honda 1992+ civic radiators sandwiched together up front, they dont take up much room and are efficient. Original OEM honda ones can probably be sourced really cheap on the honda forums, since those ricers tend to put in koyo or some other riced model that are less than efficient but have lots of bling, but no go effects. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now