lastchance Posted February 15, 2004 Share Posted February 15, 2004 Hey guys.. On my '90 Legacy wagon MT, I believe the starter is going out. When I turn the key to the start position I can hear the starter engage but it's very hard to turn over...It's not a slow turnover, it just takes like 4-6-10 times of trying to get it started. Here's what I've ruled out as being the problem: The car runs perfectly when it gets started, no stumble, no hesitation, no excessive gas consumption, so I crossed the fuel injection system off the list. All the injectors are pulsing properly by the way. I just replaced the battery and tested the alternator and they are both fine. Hmmmmmmmm Dan Quote Link to comment Share on other sites More sharing options...
forester2002s Posted February 15, 2004 Share Posted February 15, 2004 Loose battery connection? Quote Link to comment Share on other sites More sharing options...
benebob Posted February 16, 2004 Share Posted February 16, 2004 Can you push it to start it? It could be the starter switch or solinoid. Try bridging the big wire on the starter and the small wire with the clip on it with a nice insulated screwdriver or something. Have the car in NEUTRAL and with the key on the ON position. If it is a switch problem or a connection other than the battery it'll start right up. Oh yeah watch for the sparks. Quote Link to comment Share on other sites More sharing options...
Subie Gal Posted February 16, 2004 Share Posted February 16, 2004 could also be starter CONTACTs.... we sell a TON of them at work (subaru dealership) cheers Jamie Quote Link to comment Share on other sites More sharing options...
applegump Posted February 16, 2004 Share Posted February 16, 2004 If the starter contacts have never been replaced before, it is the first thing I would look at. I had to do mine twice so far, so about every 80k for me. Quote Link to comment Share on other sites More sharing options...
ScoobySchmitty Posted February 16, 2004 Share Posted February 16, 2004 A clicking usually means a bad starter solonoid. Anyone know if you can replace these on Soob starters, or do you need to get a whole new starter??? Quote Link to comment Share on other sites More sharing options...
Legacy777 Posted February 16, 2004 Share Posted February 16, 2004 You can replace the starter solenoid contacts, if that's what it is. check an old thread of mine. http://www.ultimatesubaru.org/usmb/forum/showthread.php?s=&threadid=2447&perpage=25& there's pics later in the thread with what the contacts look like and where you can get them. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.