Gregg Posted February 17, 2004 Share Posted February 17, 2004 I know, I know - the idea seems silly. However, a lot of clutch work kills my knees, so I need to stick with an automatic transmission. Anyway, running my XT through the gears gets me to ~85 before power tapers off - I can cruise at ~95 if I push it, but it's difficult. Using the gear selector, 2nd tops out at 75, so I figure one more forward gear would allow me to hit ~120 or so (which would be nice for embarrasing ricers). So... how hard would it be to swap my 3AT for a 4AT, on an FWD? Link to comment Share on other sites More sharing options...
Stupidru Posted February 17, 2004 Share Posted February 17, 2004 Cool, we don't have many NA xt owners on the board. Welcome! My neighbor has one w/ a rice muffler on his, you can hear him coming 2 blocks away, you can tell its a subaru, they all have a distinct sound, even the new ones. I feel your pain, my ea81t has an 3at, it really holds the car back! Link to comment Share on other sites More sharing options...
Gregg Posted February 17, 2004 Author Share Posted February 17, 2004 Thx... Just one gear is all I'm asking for, lol - it's a demon until it hits 3rd, and I loose all my grunt )-: Link to comment Share on other sites More sharing options...
AKIRA Posted February 17, 2004 Share Posted February 17, 2004 I remember reading that it wold be hard to do because the 3 speed is hydraulic and the 4 speed is electronic, but that could have been for an EA81 threespeed. anybody know for sure? Link to comment Share on other sites More sharing options...
Skip Posted February 17, 2004 Share Posted February 17, 2004 Akira is correct, the 4EAT (4 speed Electronic Transmission) has an electronic control unit. The 3AT does not. You could possibly swap the TCU, the wiring, and the speedometer (has a speed sensor in it) I am sorry I do not know if the mounts are the same. But it would bolt to your engine. Sorry not much help Link to comment Share on other sites More sharing options...
Gregg Posted February 17, 2004 Author Share Posted February 17, 2004 Grr.... anyway to lower my gearing so that I can keep pulling after ~80mph? Link to comment Share on other sites More sharing options...
Stupidru Posted February 17, 2004 Share Posted February 17, 2004 Eventually I will convert to pushbutton on-the-fly 5speed. This is the best performance mod I can give this old turbo pushrod engine! Link to comment Share on other sites More sharing options...
Gregg Posted February 17, 2004 Author Share Posted February 17, 2004 If you devise a feasible way to make the car triptronic... Link to comment Share on other sites More sharing options...
Skip Posted February 17, 2004 Share Posted February 17, 2004 Excuse me if I am stepping out of bounds. Gregg do you by chance mean TIPtronic? If so... The 4EAT is a very interesting specimen for this type of shifting - as with this transmission all shifting is all done by solenoids and remote control so to speak. Paddle shifters ala F1 anyone?? Sorry for butt heading in Link to comment Share on other sites More sharing options...
Gregg Posted February 17, 2004 Author Share Posted February 17, 2004 I could never get the spelling of that word down to save my life! If a 5MT could be wired to operate tiptronically, I'd be happy, since it seems it would be easier to mate the 5MT with a car that orgininally had a 3AT than it would be to swap in a 4AT. As it is, I have a bad habit of manually operating my gear selector (I strart out in D, then drop down to 1 and work my way through when I feel like kicking things into high gear). Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now