mxmikie Posted June 2, 2010 Share Posted June 2, 2010 where is the plug for the trailer wiring harness on a 1997 impreza outback sport ???? i cant find it Link to comment Share on other sites More sharing options...
JPX Posted June 2, 2010 Share Posted June 2, 2010 .... ModuLite Tow Ready Circuit Protected Taillight Converter with 4-Flat End, part number 119175. The ModuLite is supposed to help protect the car's wiring in case of a short in the trailer wiring, and I doubt that the JC Whitney harness would have much more than a fuse. I used a similar harness (that I bought from an auto parts store back in 1996). This was for my 1996 Legacy L sedan, which certainly did not have a connector to plug anything into. The module is helpful for separating out the turn signals and brakes. I simply tapped into the tail light assembly. I don't exactly recall which wires I spliced into the harness pigtail, but I can take a look later and post what I did later. It wasn't difficult, but it isn't nearly as elegant as plugging into the factory harness. Link to comment Share on other sites More sharing options...
johnceggleston Posted June 2, 2010 Share Posted June 2, 2010 where is the plug for the trailer wiring harness on a 1997 impreza outback sport ???? i cant find it it may not have one, the legacy doesn't. just the outback in the late 90s. but if it is there it is behind the left rear tail light bulb access panel. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now