555jay Posted June 7, 2010 Share Posted June 7, 2010 I'm working on a EA81T rebuild/replace, mostly by putting a motor from an 84 into my 83. The fan mount on the front of the water pump on the 84 motor was crushed, so I pulled both off thinking I'd just keep using the one from the 83, only to find they were distinct... 84 on left; 83 on right. Is one of these aftermarket? Is one of these preferable? I like the idea of a non-rusted cast impeller, but unfortunately for me the crushed fan mount has not been willing to come off the pulley so far... So also: Any tips to getting that fan mount off? My 22mm wrench is too fat to fit in there nicely, and even when I do get it wedged in there to get a grip, the 10mm bolts between the two parts are stubborn like crazy. Thanks! Link to comment Share on other sites More sharing options...
GeneralDisorder Posted June 7, 2010 Share Posted June 7, 2010 The cast impeller is an OEM (Paraut) style pump. The stamped impeller is aftermarket. There is no real performance difference - I've used both on many engines and both perform without problem. The water pumps are pretty cheap new - I would get a new one if it was me. They are still availible - about $35 in the aftermarket. As for getting the fan clutch off - a quality 10mm end wrench and a flat blade screwdriver to hold on two of the other studs to keep it from turning is what I use. GD Link to comment Share on other sites More sharing options...
Durania Posted June 8, 2010 Share Posted June 8, 2010 GD is correct. I bought a "Made in Japan" waterpump at the Auto Zone for about $40 bucks. Make sure and use black RTV to seal it up. Or just get one from the dealer. Link to comment Share on other sites More sharing options...
ShawnW Posted June 8, 2010 Share Posted June 8, 2010 The paper gasket from the dealer will hold if torqued properly. With a torque wrench. Link to comment Share on other sites More sharing options...
555jay Posted August 28, 2010 Author Share Posted August 28, 2010 Okay, so... Am I supposed to have a fan on the water pump pulley? Because I can't find any reference to it in the pdf copy of the Subaru engine maunal; only the electric fan on the other side. But if not, how have I found two EA81T that both have one? Link to comment Share on other sites More sharing options...
GeneralDisorder Posted August 29, 2010 Share Posted August 29, 2010 I beleive the EA81T's were equipped with clutch fans, yes. Thus the reason they have the bolt-on pulley vs. the NA EA81 with the pressed on pulley. GD Link to comment Share on other sites More sharing options...
naru Posted August 29, 2010 Share Posted August 29, 2010 Okay, so... Am I supposed to have a fan on the water pump pulley? Because I can't find any reference to it in the pdf copy of the Subaru engine maunal; only the electric fan on the other side. But if not, how have I found two EA81T that both have one? Pretty sure only AC equipped EA-81Ts had the engine driven clutch fan.Mine doesn`t have one. Link to comment Share on other sites More sharing options...
555jay Posted August 30, 2010 Author Share Posted August 30, 2010 Thanks again for the info. I don't want to cut corners, but I also don't want to chase my tail trying to figure out parts that Subaru doesn't bother mentioning. It's probably in some other supplemental doc about the a/c. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now