outback_97 Posted June 9, 2010 Share Posted June 9, 2010 Hey guys, I have gotten a few instances of CEL and when I read it it's a P0325 code. The car has almost 160K miles and I'm sure the knock sensor is original, so I was going to replace it. The stealership wants >$100 for one, in searching online I saw this one for 1/2 of that price on ebay. Anyone here try one of these? Any good, or stay far away? Thanks! Link to comment Share on other sites More sharing options...
86subaru Posted June 9, 2010 Share Posted June 9, 2010 i have used them off ebay with no problem Link to comment Share on other sites More sharing options...
outback_97 Posted June 10, 2010 Author Share Posted June 10, 2010 Thanks 86, that's good to know. I think I'll order one up and see if that fixes my CEL. Link to comment Share on other sites More sharing options...
bratman18 Posted June 10, 2010 Share Posted June 10, 2010 Same here. I have used a couple from ebay without any issues Link to comment Share on other sites More sharing options...
Rooster2 Posted June 10, 2010 Share Posted June 10, 2010 When doing the swap out, suggest using a wobbler between your drive extension and the socket, as the securing bolt cannot be removed on a straight line set up. Also, just snug up the bolt on replacement, as over tightening will break the plastic sensor unit. Good luck on this project. Hope it eliminates your CEL, and your car runs better. Link to comment Share on other sites More sharing options...
outback_97 Posted June 10, 2010 Author Share Posted June 10, 2010 Thanks for the tips guys! I ended up ordering one from here since the rating was a little higher and they're closer to me. I'll have to let you know how it goes after I get it next week. The car is actually running fine. I would love for the mileage to improve when I get this installed though. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now