Adam N.D.J. Posted June 11, 2010 Share Posted June 11, 2010 Hey everybody, just got back from the middle east a little bit ago, and one of the first things I did was dust off my Roo's and go to start em up. Well, when I went to fire up the 84, turned it on and immediatly got the squeal of death. It funny, cause it worked just fine a year and a half ago when it was last ran, but now, dead. Has anyone made any headway with these, I know a couple years ago there were some guys (Rob maybe ?) working on seeing about getting these fixed. I'm sitting here with 3 dead dashes, and while I'm not an electronics expert I'm fairly competent with circuitry, and I can't see a dang thing wrong with any one of them, I've been over the traces, check the resistors, transistors, diodes, vr's, everything, over and over, and I"m getting a bit frustrated. After a year of driving bloated overweight military monstrosities I really want to take out the gracefully elegent hardtop, but can't really do that with a gaping hole where the instruments are suppose to be. Anyways, sorry for the rant. Thanks, and take care. Link to comment Share on other sites More sharing options...
NoahDL88 Posted June 11, 2010 Share Posted June 11, 2010 Welcome back, and thanks for doing your time in the suck, we all appreciate it. What exactly is wrong with your dash, is it a specific gauge or is it the entire cluster? Link to comment Share on other sites More sharing options...
bratsrus1 Posted June 11, 2010 Share Posted June 11, 2010 Hi Adam This is Jerry, good to see your back i would really like to see you at the show this year. Thanks Jerry Link to comment Share on other sites More sharing options...
Caboobaroo Posted June 12, 2010 Share Posted June 12, 2010 Adam, great to hear from you again! Sorry but I can't tell you whats wrong with your cluster but glad to know you're still around! Link to comment Share on other sites More sharing options...
Adam N.D.J. Posted June 12, 2010 Author Share Posted June 12, 2010 (edited) Thanks all. Well, it's the usual Gen 2 digi problem, no guages work, high pitch squeal. Was just hoping that there has been some headway made on it. Looks like I'll prolly hafta sit down with the DVOM and start going through it, maybe I'll come up with something. I have a wedding I have to go to the 21st, so looks like another year that I won't make the show, that and I don't have a roo too take up there right now, turbo down for the dash and a bunch of minor repairs, and the Brat was not happy with the year and a half of sitting, chasing some probs in the fuel injection and the rag joint on the steering is shot. I will be gunning for next year for sure though. Edited June 12, 2010 by Adam N.D.J. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now