JohnKos Posted June 25, 2010 Share Posted June 25, 2010 (edited) Had my dash repaired due to a unauthorized radio removal. Now the lights under the control buttons are sometimes on and sometimes off.When the lights work so do the buttons. When the lights don't light the vents won't switch from say dash vents to defrost or floor heater. Could this just be a loose wire somewhere when the body shop reassembled the dash? They did screw up and connected the wires under the dash that caused my CEL to flash. Do the lights and the movement of the vents go together or is it just a coincidence? Hopefully it's something simple. 97 legacy Edited June 25, 2010 by JohnKos added year and model Link to comment Share on other sites More sharing options...
Rooster2 Posted June 25, 2010 Share Posted June 25, 2010 I am thinking that wiring connectors were incorrectly to the wrong power source. Like you said, some other wires were incorrectly connected to cause your CEL response. If it hasn't been too long since repairs were made, take your car back to who did the work, and let them sort out what should properly connect to what. Years back, I had the same problem, and had a devil of a time trying to get things connected properly. Finally, I went to a wrecking yard, found a same year Subaru, and marked down on paper what color wires in what male connector plugged into what female connector. That helped a lot to finally get all wiring to work properly. Link to comment Share on other sites More sharing options...
JohnKos Posted June 25, 2010 Author Share Posted June 25, 2010 I think i'm going to give it a shot on my own. i don't need the hassle or wait buy letting them do it. i changed the bulbs in it a year ago, so i at least don't have to disconnect the cable. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now