T'subaru Posted July 5, 2010 Share Posted July 5, 2010 I didnt want to bury this in the official thread, but im curious if any of you guys have had success in sourcing alternative lug nuts and or adapters, found vw uses 60 degree adapter, and there are several 60 degree lugs out there...im trying to use a set of 505 pug turbo alloys and want to avoid rust and or plating color issues.. thanks Link to comment Share on other sites More sharing options...
Crazyeights Posted July 5, 2010 Share Posted July 5, 2010 The adapters do work as they were on my wagon for a while before I bought a set of the replica pug lugs on here (which are really nice btw). I can't speak for how safe they are though. Link to comment Share on other sites More sharing options...
T'subaru Posted July 5, 2010 Author Share Posted July 5, 2010 (edited) The adapters do work as they were on my wagon for a while before I bought a set of the replica pug lugs on here (which are really nice btw). I can't speak for how safe they are though. Are you having rust issues with them? or did you order plated?..if so what color are they? thanks Edited July 5, 2010 by T'subaru Link to comment Share on other sites More sharing options...
Crazyeights Posted July 5, 2010 Share Posted July 5, 2010 The replicas don't come plated. Ya, they rust but so does the rest of my car:grin: Seriously though, I'm just going to wait for a little more surface rust to develop and coat them with some POR-15 or something. Link to comment Share on other sites More sharing options...
T'subaru Posted July 5, 2010 Author Share Posted July 5, 2010 The replicas don't come plated. Ya, they rust but so does the rest of my car:grin: Seriously though, I'm just going to wait for a little more surface rust to develop and coat them with some POR-15 or something. Im 'bout 1500 feet from the ocean here...currently driving a near transparent toyota pick up while working on my subi:lol: Link to comment Share on other sites More sharing options...
GeneralDisorder Posted July 6, 2010 Share Posted July 6, 2010 Being that you have need of "protective coatings" where you live - have you tried talking to any local plating companies about doing a run of zinc for you? Usually it's really reasonable - I got a whole engine cross-member done for $50 - I threw it in with some other small parts and a friend and I split the cost down the middle. The whole run was about $100 for everything. That's assuming you deliver it to them already sand-blasted, prepped, etc. But it's a lot more durrable than paint. As for the lug-nuts - what is different about them that you can't just source them from any old tire shop? A picture would help me. I have a lathe and I'm not afraid to use it...... GD Link to comment Share on other sites More sharing options...
T'subaru Posted July 6, 2010 Author Share Posted July 6, 2010 (edited) Being that you have need of "protective coatings" where you live - have you tried talking to any local plating companies about doing a run of zinc for you? Usually it's really reasonable - I got a whole engine cross-member done for $50 - I threw it in with some other small parts and a friend and I split the cost down the middle. The whole run was about $100 for everything. That's assuming you deliver it to them already sand-blasted, prepped, etc. But it's a lot more durrable than paint. As for the lug-nuts - what is different about them that you can't just source them from any old tire shop? A picture would help me. I have a lathe and I'm not afraid to use it...... GD I'll drop by with a sample GD:) Edited July 6, 2010 by T'subaru Link to comment Share on other sites More sharing options...
32ford Posted July 8, 2010 Share Posted July 8, 2010 i got some pug lugs made in adelaide with very high quality chrome in adelaide for $12 au a piece by this mob http://www.galproeng.com.au/ Link to comment Share on other sites More sharing options...
The Scooby Posted July 9, 2010 Share Posted July 9, 2010 SVX lug nuts, fit perfect and have been fine for the last year on my rig Link to comment Share on other sites More sharing options...
T'subaru Posted July 10, 2010 Author Share Posted July 10, 2010 SVX lug nuts, fit perfect and have been fine for the last year on my rig interesting...on the pug alloys ? and are you using the pug adapters too? Link to comment Share on other sites More sharing options...
4x4brat Posted July 22, 2010 Share Posted July 22, 2010 I had them Nickel Plated this RUN......Get YOURS........ Order Today!!! :eek: "WHILE THE SUPPLY LASTS" :slobber: Link to comment Share on other sites More sharing options...
T'subaru Posted July 23, 2010 Author Share Posted July 23, 2010 Nice! Ive got 20 of 'em on the way Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now