subynut Posted July 20, 2010 Share Posted July 20, 2010 Depends on what you want out of your 4wd. I was running out of gearing on my stock '86 wagon out here in the sand and rocks (mud? what's that?) I finally learned that it's gearing and torque in the off roading world that is required. I was always burning my clutch trying to crawl through sand and rocks because I couldn't charge it. So, I read the board, read many a off roading story, read many a off road roo buildup. After weighing the advantages and disadvantages of a lifted Roo vs a bigger 4WD, you know what I found on every one of those threads? The search for more torque at a half MPH. According to my calculations, with the kind of terrain I travel while wheeling, I would need enough lift to put a second transfer case in with 4.44 geared diffs and no bigger than 32" tires and an EJ22 tuned for lots of low end torque. Just so that I can crawl through that rock bed or that sandy wash I got stuck in countless times due to not enough power to spin the stock tires let alone 27" or 30" tires. I've seen what a lifted Roo can do (and it's awesome what they are capable of) and I've seen what a stock bigger 4wd can do. At least for me, I chose the bigger 4WD - an F350 V10, 6spd Manual, 4:30 gears and 35" tires (one step up from stock). Why? Gearing and lots of torque. That thing will crawl over anything it can get it's tires over, at idle, and I can tow anything I feel like. Did I loose a bit? Yes. The truck is a standard cab, it gets half the mileage my Subaru got, it is a bit bigger, the insurance is higher, and maintenance is more expensive, . But for me, it was the better trade off. If it breaks less, that means less wrenching and more wheeling. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now