Brat79 Posted July 31, 2010 Share Posted July 31, 2010 Hey can anyone who has done a like a 4 inch lift on a 79 brat send me like a "how to" guide to do it? I just want a basic lift and do not posses the know how to build my own. Any help would be greatly appreciated Link to comment Share on other sites More sharing options...
michael appel Posted August 3, 2010 Share Posted August 3, 2010 It is not easy at all. The front is easy make a 4 inch strut top use a 4 1/2 inch square tube have it cut to 15 degree angles make some tops up if you dont posses a cutting torch and a welder good luck with that. The rear is very sophisticated you have to drop both swing arms on the brat basically building a subframe then bolting the arms on it lower not so hard to do but hard to make. Link to comment Share on other sites More sharing options...
Pooparu Posted August 5, 2010 Share Posted August 5, 2010 I know Bill made a few (I bought one then sold one). I saw it installed and it worked great. I'm not sure if he's producing them anymore, but you can check or if Mike can do it snag one from him. Link to comment Share on other sites More sharing options...
mcbrat Posted August 5, 2010 Share Posted August 5, 2010 I have a 4" Gen1 lit for sale in the Marketplace... Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now