Crawlerdan Posted August 1, 2010 Share Posted August 1, 2010 hey guys- i want to pick a few subaru brains here. 2000 forester 2.5 sohc auto idles great, runs great- but while driving, if you accelerate, or come to an incline, it stumbles, acts as though its out of gas, if you let off it goes away. typically its at its worst between 1500 and 2750 it has- new plugs and wires, new air and fuel filters, new pcv, ect everything sensor wise is clean..... cat was replaced a few years ago- 02 sensors replaced a few years back, she says less then 20 since then ideas? Link to comment Share on other sites More sharing options...
Crawlerdan Posted August 1, 2010 Author Share Posted August 1, 2010 forgot- all grounds have been cleaned. and teh CEL flashes eery now and then Link to comment Share on other sites More sharing options...
nipper Posted August 2, 2010 Share Posted August 2, 2010 How many miles. I bet the CEL is misfire if it is flashing. When was the last time the wires were replaced along with the timing belt? Link to comment Share on other sites More sharing options...
Crawlerdan Posted August 2, 2010 Author Share Posted August 2, 2010 i inspected the belt- its in good shape, wires replaced this afternoon has 169k on it, getting an intermitent code for cyl 2 misfire im betting the belt was fone at 105, it is a subaru belt Link to comment Share on other sites More sharing options...
nipper Posted August 2, 2010 Share Posted August 2, 2010 What kind of wires? Mist the coil at night and see if you see any sparklies. Link to comment Share on other sites More sharing options...
Crawlerdan Posted August 2, 2010 Author Share Posted August 2, 2010 they are duralast whatever garbage. im trying to help out a single mom, no job, ect. shes got no coin basically the wires arent jumping now Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now