biged52 Posted August 3, 2010 Share Posted August 3, 2010 Hi I have one cylinder that misses from 1 to 10 seconds about every 3rd time i start it.i changed the plugs ,coil,wires, and fuel injector and it stiil does it.we just got back from a 1600 mile trip. it does not lose water any ideas? thanks ed Link to comment Share on other sites More sharing options...
nipper Posted August 3, 2010 Share Posted August 3, 2010 Just throwing parts at something makes it impossible to easily diagnose. I would suggest putting the original parts back on except the tuneup parts. Then I would pull the codes and find out what cylinder it is or any other codes. Also you MUST give us year miles transmission and engine otherwise we are totally blind on any post. What kind or wires did you use. What plugs, where did the coil come from? Link to comment Share on other sites More sharing options...
porcupine73 Posted August 3, 2010 Share Posted August 3, 2010 Yes please post model, mileage, etc. If it happens to be cylinder #1 there is something about idle control on some of the mid 90's that could make the ECU cut injection pulses. Link to comment Share on other sites More sharing options...
artie b Posted August 15, 2010 Share Posted August 15, 2010 Hi, I have been battling something simular to this. I will clean out or replace my IAC, and report back... Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now