tcellajr Posted August 7, 2010 Share Posted August 7, 2010 will a 1999 and 2001 subaru forester engine swap direct?? i have an 01 that lost a rod and found a 99 eng,but wanted to know if it will work 1st thanks tom Link to comment Share on other sites More sharing options...
johnceggleston Posted August 7, 2010 Share Posted August 7, 2010 will a 1999 and 2001 subaru forester engine swap direct?? i have an 01 that lost a rod and found a 99 eng,but wanted to know if it will work 1st thanks tom as long as they are both SOHC they will swap. but some engines 00 - 04 had slight differences so hang on to your cam and crank sprockets until you get it running. was your 01 a head gasket / overheating engine?? Link to comment Share on other sites More sharing options...
tcellajr Posted August 7, 2010 Author Share Posted August 7, 2010 na, it spit a rod out. i did the gaskets at 115 it gad 160 on it when it gave up.. Link to comment Share on other sites More sharing options...
logic23 Posted August 8, 2010 Share Posted August 8, 2010 This is a trend I have been noticing with foresters. 99+ are throwing rods without any HG issues...I have replaced three and seen many more. Any ideas why this might be happening? Link to comment Share on other sites More sharing options...
idosubaru Posted August 8, 2010 Share Posted August 8, 2010 This is a trend I have been noticing with foresters. 99+ are throwing rods without any HG issues...I have replaced three and seen many more. Any ideas why this might be happening?it's not just a forester issue - it's EJ25's. i've seen a bunch too and have some for scrap. a guess is that prior to having head gaskets replaced (common on EJ25's), the running hot affects either the metal or oil which degrades the bearings. not substantially, but enough that over time they fail. Link to comment Share on other sites More sharing options...
davebugs Posted August 8, 2010 Share Posted August 8, 2010 I've had issues with a 99 Forester. Took 3 engines to get a good one. A 99 forester SOHC was bad, a 2000 Legacy SOHC, also bad, finally a 2001 Legacy SOHC. If you think the timing belt you have for the 99 is impossible to install on the Legacy engine this is exactly what happened to me - and they call for a different timing belt. IIR the one for the 99 SOHC is smaller and when I couldn't get it on I called the parts store and the Legacy engine actually took a different belt. I swapped intakes, for some reason I believe motor mounts, etc. Link to comment Share on other sites More sharing options...
Gloyale Posted August 8, 2010 Share Posted August 8, 2010 If you think the timing belt you have for the 99 is impossible to install on the Legacy engine this is exactly what happened to me - and they call for a different timing belt. IIR the one for the 99 SOHC is smaller and when I couldn't get it on I called the parts store and the Legacy engine actually took a different belt. they gave you a phase I 2.2 belt. All Phase II SOHC engines use the same belt (except maybe late VVT models) Link to comment Share on other sites More sharing options...
logic23 Posted August 8, 2010 Share Posted August 8, 2010 yep i posted this two weeks ago: the forester and outback belt are the same thing..except i think the forester belt is a little heavier duty. Also Forester engines have a plastic pass side cam. Link to comment Share on other sites More sharing options...
davebugs Posted August 9, 2010 Share Posted August 9, 2010 they gave you a phase I 2.2 belt. All Phase II SOHC engines use the same belt (except maybe late VVT models) I used to do enough of them that I'd like to think I'd have noticed that. But perhaps I didn't. Link to comment Share on other sites More sharing options...
davebugs Posted August 9, 2010 Share Posted August 9, 2010 Actually now that I think about it I tried to reuse the belt off the first engine which was a 99 Forester. Than it wouldn't work on the 2000 SOHC from a Legacy. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now