wrongturninwv Posted August 9, 2010 Share Posted August 9, 2010 Had to remove a intake manifold on a 2.2 engine. Need to know if you use a sealer with new gaskets. If so what is the best to use. thanks Link to comment Share on other sites More sharing options...
GeneralDisorder Posted August 9, 2010 Share Posted August 9, 2010 Always installed dry. GD Link to comment Share on other sites More sharing options...
idosubaru Posted August 9, 2010 Share Posted August 9, 2010 there's hardly any gaskets or seals that get sealant applied to them - actually i can't think of any right now off the top of my head. parts are sealed with either sealant or seals, not both. Link to comment Share on other sites More sharing options...
GeneralDisorder Posted August 9, 2010 Share Posted August 9, 2010 I do use RTV on some very limited applications. Cork gaskets - but generally those are only used on older equipment and engine designs. The RTV makes them "rubberized" and helps their longevity immensely. The aftermarket paper EJ water pump gaskets - I use RTV on those. But really Gary is right - sealant or gasket. Almost never both. And when you *do* use sealant - most people use WAY too much. If more than 1/32" of squeeze-out occurs - you have used too much. Generally a thin smear with your fingertip is all that is required. Uniformity is much more important than quantity. GD Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now