vagen Posted August 18, 2010 Share Posted August 18, 2010 I never thought it would be so difficult to fund one of these swaps.... Life likes to kick me when I'm down. I am to the point of considering the sale of my long hunted and just acquired Peugeot flat spokes. I'm just getting frustrated and need to vent:banghead: Link to comment Share on other sites More sharing options...
renob123 Posted August 18, 2010 Share Posted August 18, 2010 I never thought it would be so difficult to fund one of these swaps.... Life likes to kick me when I'm down. I am to the point of considering the sale of my long hunted and just acquired Peugeot flat spokes. I'm just getting frustrated and need to vent:banghead: Just don't feel too rushed to start/complete it. It will probably take way longer than expected to complete the EJ swap. I'd hang onto the Pugs and make up the money over time. If you sell them to buy another part for the swap, then you'll be in the same boat next time you need a part and don't have the money. Jacob P.S. Oh yeah, and it's totally worth it:banana: Link to comment Share on other sites More sharing options...
Scott in Bellingham Posted August 19, 2010 Share Posted August 19, 2010 Ive done trades for parts , I have the plate and flywheel Link to comment Share on other sites More sharing options...
Turbone Posted August 19, 2010 Share Posted August 19, 2010 ^^^This A lot of my swap was done this way (Thanks Scott) I knew I was going to do the swap before my current engine died on me. I believe we warned you ahead of time, so you could have had the head start you needed. Link to comment Share on other sites More sharing options...
Yo'J Posted August 19, 2010 Share Posted August 19, 2010 It took me two years to get all the parts together in a pile. Now its all in EXCEPT for good injectors and a good tune. I started in what? december? It still wont run right and my dd motor is slowly crapping out so its got a motor waiting, now freshly resealed. Link to comment Share on other sites More sharing options...
vagen Posted August 19, 2010 Author Share Posted August 19, 2010 Turbone I took your advice and started putting money aside I just didn't anticipate the EA blowing so soon. oh well I am really close to the engine purchase price. Scott what do you need for the plate and flywheel. I have a few parts I can trade. Link to comment Share on other sites More sharing options...
subaruguru Posted August 20, 2010 Share Posted August 20, 2010 i have a harness i am willing to sell it is already cut and labled you would just need to put it in pm me if you are interested. On another note i did my ej swap in about 4 weeks or 2 months if you count converting the car from 2WD auto to 4WD 5 speed. Link to comment Share on other sites More sharing options...
vagen Posted August 20, 2010 Author Share Posted August 20, 2010 I have an engine and harness located as a matched set but thanks for the offer. Link to comment Share on other sites More sharing options...
T'subaru Posted August 22, 2010 Share Posted August 22, 2010 Im not sure what your up against in the area you live, but I was able to part a complete car for about 250.00, anything I wanted..and that helps with the over all budget. One thing im sure of is when its all done I really dont want to know how many dollars ive put into a 20 year old wagon. Good luck dude, Mark Link to comment Share on other sites More sharing options...
vagen Posted August 25, 2010 Author Share Posted August 25, 2010 I bought a running Rebuilt in December Legacy wagon with a bad trans for $600 there just isn't anything out here that is cheap and a manual. Link to comment Share on other sites More sharing options...
Scott in Bellingham Posted August 25, 2010 Share Posted August 25, 2010 Scott what do you need for the plate and flywheel. I have a few parts I can trade. Laptop computer I can burn and play DVDs on Early ford escort distributer , coil and ignition wiring EA82 4wd flywheels Dual Core EA82 Radiator Link to comment Share on other sites More sharing options...
vagen Posted August 25, 2010 Author Share Posted August 25, 2010 Laptop computer I can burn and play DVDs on Early ford escort distributer , coil and ignition wiring EA82 4wd flywheels Dual Core EA82 Radiator I may just have #1 if you like mac that is... Link to comment Share on other sites More sharing options...
Scott in Bellingham Posted August 25, 2010 Share Posted August 25, 2010 I may just have #1 if you like mac that is... never had one , not aginst it, would like to know the specs , as long as its a stand alone unit that can play and burn DVDS and can exchange files with my PC , Picture softwere would be nice internet access would be cool too Link to comment Share on other sites More sharing options...
vagen Posted August 26, 2010 Author Share Posted August 26, 2010 macbook version 1.1 1.83mhz core duo 2gb ram (maxed out) 120gb HDD 13.1" screen super drive (DVD read/burn) can run windows (not sure why anyone would want to) currently has OS10.6 (the latest version) can run MS files along side apple Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now