thebearjew Posted August 22, 2010 Share Posted August 22, 2010 My name is jeremiah i am new to the subaru forum and i recentley picked up a 1982 subaru gl wagon... i bought it about the beginning of july and about 2 days ago the rod went threw the block and now i am looking at doing a motor swap to run fuel injection.. wondering how hard it will be to do and how much it costs? Link to comment Share on other sites More sharing options...
idosubaru Posted August 22, 2010 Share Posted August 22, 2010 you want to do an SPFI swap? you'll want to find the write up for that. as for cost, do you mean for parts or to have someone do it? parts will vary wildly, depends on your resources and time and luck. pull it yourself yards close by with good rates and older EA stuff? got time to wait for a good deal or need it now? just depends, this stuff isn't at walmart! same sort of goes for installing it. free if you do it yourself, to pay someone will vary all over the place being a custom job. another good option is to post what parts you want in the parts wanted forum here. include your location as some folks arent' going to mess with shipping motors. Link to comment Share on other sites More sharing options...
rainman19154 Posted August 22, 2010 Share Posted August 22, 2010 Welcome to the board! My experience with engine swaps is limited but the Subaru swap I did was on a car about the same vintage you're dealing with. I did it in eight hours, working solo. Very do.able. As for the upgrade, that complicates it all. Going to fuel injection, the electrical is going to be as big a project as the mechanical. Link to comment Share on other sites More sharing options...
thebearjew Posted August 23, 2010 Author Share Posted August 23, 2010 yea man get ya.. i just am going to price things out i found a block on craigslist for 100 so i might start with that and move forward Link to comment Share on other sites More sharing options...
SubieDaddy80 Posted August 23, 2010 Share Posted August 23, 2010 Welcome to the board Jeremiah! Get familiar with the "search" content as it can be of great help while doing your project. There are many many threads related to that subject on here. Good luck and again, welcome to the board! Link to comment Share on other sites More sharing options...
thebearjew Posted August 24, 2010 Author Share Posted August 24, 2010 thank you yea a little weird to get used to... i got a question for anyone that knows? can a 1987 1.8l fit with ease in my 1982? i think its almost the same motor just not sure cause a guy is selling one really cheap here and i wanna know if it works before i go out and buy it Thanks Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now