djmark7 Posted August 25, 2010 Share Posted August 25, 2010 just replaced all the struts on my 98 legacy wagon and the abs light came on steady, all the sensors are wired and in place? any ideas? also how would i read a code (if any) from the abs system?, thnx, Mark Link to comment Share on other sites More sharing options...
1-3-2-4 Posted August 25, 2010 Share Posted August 25, 2010 We need to know what year we are talking about here. Link to comment Share on other sites More sharing options...
djmark7 Posted August 25, 2010 Author Share Posted August 25, 2010 as stated above '98 Link to comment Share on other sites More sharing options...
1-3-2-4 Posted August 25, 2010 Share Posted August 25, 2010 ah missed that sleep must be catching up to me Link to comment Share on other sites More sharing options...
logic23 Posted August 25, 2010 Share Posted August 25, 2010 It possible that the wires could have been damaged... To pull the codes there is a black pug under the dash to the right of the steering column with two black wires in the same harness . you insert one of the wires (doesn't matter which one) into one of the plugs ( do a search on the forum and you should be able to tell which one) then turn on the ignition. Voila the abs light will start flashing the codes. Nipper has a list of the codes. Link to comment Share on other sites More sharing options...
johnceggleston Posted August 25, 2010 Share Posted August 25, 2010 maybe dirt, rust, metal flakes on the sensor it self, or a tone ring. reading the code will tell you which wheel? is the problem. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now