88Subi4x4 Posted September 9, 2010 Share Posted September 9, 2010 Can anyone help......? (its a 91 EJ22) So i got almost all my Ej Wiring done it seems that i am not getting signal to my ignition...... but my starter is working.... I do not have a O2 sensor hooked up and was wondering if that would "lock" or stop it from getting ignition.....? Also is there an alternator lock out i heard someone talking about this at one time but am not sure if that is true....? Thanks Reid Link to comment Share on other sites More sharing options...
NoahDL88 Posted September 9, 2010 Share Posted September 9, 2010 ignition, start and fuel relays all are separate, if you don't have all 3 that could be your issue. Link to comment Share on other sites More sharing options...
88Subi4x4 Posted September 9, 2010 Author Share Posted September 9, 2010 O..... i will def check that out tomorrow any other ideas i cant hear my fuel pump run.... Link to comment Share on other sites More sharing options...
88Subi4x4 Posted September 10, 2010 Author Share Posted September 10, 2010 Bump........ Help! Link to comment Share on other sites More sharing options...
NoahDL88 Posted September 10, 2010 Share Posted September 10, 2010 did you even check what I suggested? Make sure you're getting voltage to the relays, make sure they click and make sure you're getting voltage to the other side of the main ignition relay. Link to comment Share on other sites More sharing options...
SkankinPickle Posted September 10, 2010 Share Posted September 10, 2010 (edited) ! Edited September 10, 2010 by SkankinPickle Link to comment Share on other sites More sharing options...
SoobieDoo Posted September 11, 2010 Share Posted September 11, 2010 Def check those relays with a DMM. You should be able to hear that fuel pump. Try using the stock FP relay as a test...hell, my EJ one still isn't hooked up. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now