RSVX Posted February 23, 2004 Share Posted February 23, 2004 I did some searching and I couldnt find what I was looking for. So here we go. 1. I need to change my two turbo coolant hoses. Anyone have a how to? 2. I keep seeing about the 5 lug XT hub swap... is there a how to/parts list for that? Thanks in advance, that damn search limit kicked my butt, I couldnt put the #5 in!! Link to comment Share on other sites More sharing options...
svxpert Posted February 23, 2004 Share Posted February 23, 2004 hey, we met at the first Reading meet. I had the Siver SVX, back then i think you lived in Marlton. If your off tomorrow (tues) i'm only like 10 min from you and we can talk about what you need. I have to go up to SOA so i could hit you on the way. I have a 5 lug RX too. mail me at: subarueast@yahoo.com Link to comment Share on other sites More sharing options...
88rxsedan Posted February 23, 2004 Share Posted February 23, 2004 turbo coolant hoses arent too bad, get all the spare tire and heat sheilding out of the way and snake your arm down for the bottom one. I have BIG arms, and i can do it! Link to comment Share on other sites More sharing options...
RSVX Posted February 23, 2004 Author Share Posted February 23, 2004 Originally posted by svxpert hey, we met at the first Reading meet. I had the Siver SVX, back then i think you lived in Marlton. If your off tomorrow (tues) i'm only like 10 min from you and we can talk about what you need. I have to go up to SOA so i could hit you on the way. I have a 5 lug RX too. mail me at: subarueast@yahoo.com YGEM Link to comment Share on other sites More sharing options...
WJM Posted February 24, 2004 Share Posted February 24, 2004 1. I need to change my two turbo coolant hoses. Anyone have a how to? I've always removed the turbo its self to do the job. You can replace the hoses with the OEM ones, which woudl be HIGHLY recommended, or try what Pleiades did...he got some braided stainless steel line, and used it for the lower hose. Used some fiberglass sheilding stuff as the heat sheild. 2. I keep seeing about the 5 lug XT hub swap... is there a how to/parts list for that? Well...http://corkysrocks.net/Conversion%204%20to%205.htm For starters. A while back, i took on a project, to gather the parts for a full 5 lug swap, and this was the parts list: Front axles (XT6, 4WD) 2 Front Knuckles (XT6, 4WD) R & L Lower Swing Arms (XT6, 4WD) R & L Ball Joint (XT6, 4WD) R & L Tie Rod Ends (XT6, 4WD) R & L Front Backing Plate (XT6, 4WD) R & L Front Hub (XT6, 4WD) R & L Front Disc (XT6, 4WD) R & L Front Caliper with carrier (XT6, 4WD) R & L Front Strut (XT6, 2WD) R & L Front Brake Lines (XT6, 4WD) R & L For the rear Rear Hub (XT6, 4WD) R & L Rear Disc (XT6, 4WD) R & L Rear Caliper and carrier (XT6, 4WD) R & L Rear Backing Plate (XT6, 4WD) R & L Rear Brake Lines (XT6, 4WD) R & L Now, I am not the expert...there were some threads started, but because of some people's dumb reactions/answers/questions...the threads went...badly. Im sure a technical document needs to be created for the USRM, but Corky's site pretty much covers the basics. Link to comment Share on other sites More sharing options...
xforxlifex Posted February 24, 2004 Share Posted February 24, 2004 WJM, How come your list has more stuff then the list Tex made for the board. i didnt think you needed break lines also. And RSVX try this for the 5 lug swap. also another list. http://usmb.ultimatesubaru.org/forum/showthread.php?s=&threadid=11539&highlight=five+lug+swap Link to comment Share on other sites More sharing options...
WJM Posted February 24, 2004 Share Posted February 24, 2004 where is that post at? i clicked the link and it said: "Invalid thread specified. If you followed a valid link, please notify the webmaster" Link to comment Share on other sites More sharing options...
xforxlifex Posted February 24, 2004 Share Posted February 24, 2004 Ok i changed it, didnt work for me either. That should work now. Sorry bout that. Mike Link to comment Share on other sites More sharing options...
RSVX Posted February 24, 2004 Author Share Posted February 24, 2004 GREAT Guys.. Thanks a LOT :D:D:D Link to comment Share on other sites More sharing options...
RSVX Posted February 24, 2004 Author Share Posted February 24, 2004 GREAT Guys.. Thanks a LOT :D:D:D I already have the OE Hoses for the turbo EDIT: I hit edit!! Delete the above post... weird! Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now