howpow Posted September 16, 2010 Share Posted September 16, 2010 Hello all. I have an 87 xt turbo (vortex) and was wondering what is required to mate an EJ22 engine to the 5 speed 2wd manual gearbox. Any help will be much appreciated. :-\ Link to comment Share on other sites More sharing options...
rpholz Posted September 16, 2010 Share Posted September 16, 2010 Adapter and flywheel from SJR and pick up a XT6 clutch Or just search ej swaps are quite common and lots of write ups on it Link to comment Share on other sites More sharing options...
GeneralDisorder Posted September 16, 2010 Share Posted September 16, 2010 The clutch is going to be the major issue as the T/O assembly and spline count of the 2WD 5 speed's is totally different than the 4WD 5 speed's. GD Link to comment Share on other sites More sharing options...
idosubaru Posted September 16, 2010 Share Posted September 16, 2010 maybe it would be easier to just get an EJ22 FWD trans to drop in with it? they're a dime a dozen around here, what's the supply like over there? not sure what that would do to your gearing, shouldn't be problematically (wow what a word) different but an EJ might be geared better for the power anyway? Link to comment Share on other sites More sharing options...
GeneralDisorder Posted September 16, 2010 Share Posted September 16, 2010 maybe it would be easier to just get an EJ22 FWD trans to drop in with it? I agree - this would be the best solution. GD Link to comment Share on other sites More sharing options...
howpow Posted September 18, 2010 Author Share Posted September 18, 2010 Thanks for the replies folks. I guess I was hoping that they might just bolt up. I guess the best option would be and EJ22 complete with it's own 2wd transmission. Thanks again. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now