powderhound Posted September 20, 2010 Share Posted September 20, 2010 (edited) 95 legacy 5mt Everything I've read about this makes it sound so simple...what's my problem. I got the glove box out. Removed the three screws to remove the blower motor and it drops about halfway down and hits a metal support on the right side that does not look easy to remove. What am I missing? Edited September 20, 2010 by powderhound Link to comment Share on other sites More sharing options...
lmdew Posted September 21, 2010 Share Posted September 21, 2010 You should be able to tilt it some and get it out of there. Link to comment Share on other sites More sharing options...
powderhound Posted September 21, 2010 Author Share Posted September 21, 2010 yeah I ended up bending the bracket out of bit. It bent right back and is secured by the lower cross bracket. I just don't see why everything I read said it drops right out, Mine certainly didn't. Just another my95 "feature"? Link to comment Share on other sites More sharing options...
Rooster2 Posted September 22, 2010 Share Posted September 22, 2010 yeah I ended up bending the bracket out of bit. It bent right back and is secured by the lower cross bracket. I just don't see why everything I read said it drops right out, Mine certainly didn't. Just another my95 "feature"? years back, I swapped out a blower on my 91 Leggie. It was a piece of cake. I don't remember any cross bracket in the way. Guess things change over the years. Link to comment Share on other sites More sharing options...
Arty Posted September 27, 2010 Share Posted September 27, 2010 Wow, dude. I once had someone tell me the EXACT same thing. They could not have been more wrong. I too have a 95. I was told it would be 3 screws and it would drop right out. That was a vicious lie. I had to take the glove box out, and I still had to bend a bracket just to get the stupid blower to drop out. In terms of physical space, there was no way the thing would drop out so easily. So basically, yeah... I feel your pain. I sat there the whole time, cussing the guy's name under my breath who told me it would be so simple. Link to comment Share on other sites More sharing options...
GeneralDisorder Posted September 27, 2010 Share Posted September 27, 2010 Does anyone else hear a faint whining sound in the distance? Seriously - that's relatively painless. I just did an oil pan gasket on my 350 SBC. I had to pull the entire exhaust (42 years old and it shows) and jack the engine up off the cross-member..... Now that's a pain in the neck . Whine about something that's hard or messy at least..... GD Link to comment Share on other sites More sharing options...
Arty Posted September 27, 2010 Share Posted September 27, 2010 Does anyone else hear a faint whining sound in the distance? Seriously - that's relatively painless. I just did an oil pan gasket on my 350 SBC. I had to pull the entire exhaust (42 years old and it shows) and jack the engine up off the cross-member..... Now that's a pain in the neck . Whine about something that's hard or messy at least..... GD Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now