one eye Posted September 22, 2010 Share Posted September 22, 2010 I think the Header says it all for the most part, Eric seems to be moving a little south, so We should have a good going away wheeling Party for him.... The Place Walker Time 9am Meeting place The old GI Joes parking lot at Exit 227 turn right and then take the next Right thats the parking lot straight back..................... Walker is becoming very slick and hard to tame now, last week it was pretty hard core. Its very fun!!! Who's in??????? lets get a bunch of people involved!!!!! Jeff Link to comment Share on other sites More sharing options...
88Subi4x4 Posted September 22, 2010 Share Posted September 22, 2010 Im in should have my car done and ready to beat up a little bit at walker Link to comment Share on other sites More sharing options...
Scott in Bellingham Posted September 26, 2010 Share Posted September 26, 2010 I plan to be there , should be a good run with the rain weve had Link to comment Share on other sites More sharing options...
one eye Posted September 27, 2010 Author Share Posted September 27, 2010 A few of the Regular guys are in................................... Jeff Link to comment Share on other sites More sharing options...
SoobieDoo Posted September 27, 2010 Share Posted September 27, 2010 You guys are too kool... I'm in, of course. Link to comment Share on other sites More sharing options...
TIMBERTIGER Posted September 28, 2010 Share Posted September 28, 2010 you guys think my 82 brat can make it through without a lift? Link to comment Share on other sites More sharing options...
Scott in Bellingham Posted September 28, 2010 Share Posted September 28, 2010 you guys think my 82 brat can make it through without a lift? what Tires? is the rear diff welded? stock car on stock tires a NO if we need to pull you dents may be added Link to comment Share on other sites More sharing options...
one eye Posted September 29, 2010 Author Share Posted September 29, 2010 you guys think my 82 brat can make it through without a lift? It wouldn't look the same the end, if you dont mind dents you're good. Jeff Link to comment Share on other sites More sharing options...
TIMBERTIGER Posted October 1, 2010 Share Posted October 1, 2010 ive killed three deer with this car. dents are the least of my worries! i just wanted to make sure it would make it. i dont wanna slow down the group. stock tires stock everything except for the weber. Link to comment Share on other sites More sharing options...
Scott in Bellingham Posted October 1, 2010 Share Posted October 1, 2010 ive killed three deer with this car. dents are the least of my worries! i just wanted to make sure it would make it. i dont wanna slow down the group. stock tires stock everything except for the weber. if you drive up to Bellingham I will weld up that diff for Free , an evening would be best Link to comment Share on other sites More sharing options...
TIMBERTIGER Posted October 1, 2010 Share Posted October 1, 2010 wow! thanks alot Scott ill be in touch. im still saving up for one of those SJR lifts and then ill be set! Link to comment Share on other sites More sharing options...
88Subi4x4 Posted October 4, 2010 Share Posted October 4, 2010 Im not going to be able to make it school is taking to much time and i havent gotten anything done on my stupid car Link to comment Share on other sites More sharing options...
Scott in Bellingham Posted October 4, 2010 Share Posted October 4, 2010 Im not going to be able to make it school is taking to much time and i havent gotten anything done on my stupid car no not a good answear, its on a Saturday , you can make it just get out there and get er done, Link to comment Share on other sites More sharing options...
88Subi4x4 Posted October 4, 2010 Share Posted October 4, 2010 But my car is in Everett and i Live in bellingham.... Link to comment Share on other sites More sharing options...
Scott in Bellingham Posted October 4, 2010 Share Posted October 4, 2010 But my car is in Everett and i Live in bellingham.... your in Bham, me too! Link to comment Share on other sites More sharing options...
88Subi4x4 Posted October 5, 2010 Share Posted October 5, 2010 yeah i go to school at western so its hard to work on my car when i live in a Apt. Link to comment Share on other sites More sharing options...
one eye Posted October 8, 2010 Author Share Posted October 8, 2010 Bump as a reminder!!! Jeff Link to comment Share on other sites More sharing options...
SoobieDoo Posted October 9, 2010 Share Posted October 9, 2010 Just a week left now................. Link to comment Share on other sites More sharing options...
one eye Posted October 9, 2010 Author Share Posted October 9, 2010 I think I blew the HG's in butters, it has the tale tale signs of it anyways, but I'm going to run it till its dead, I only have to put water in it every once in a while but I still hate the thought of having to give up on that motor.............. I'm sorta bummed.........................:-\ Jeff Link to comment Share on other sites More sharing options...
Scott in Bellingham Posted October 10, 2010 Share Posted October 10, 2010 I think I blew the HG's in butters, it has the tale tale signs of it anyways, but I'm going to run it till its dead, I only have to put water in it every once in a while but I still hate the thought of having to give up on that motor.............. I'm sorta bummed.........................:-\ Jeff EJ It !!!!! Link to comment Share on other sites More sharing options...
SoobieDoo Posted October 10, 2010 Share Posted October 10, 2010 I think I blew the HG's in butters, it has the tale tale signs of it anyways, but I'm going to run it till its dead, I only have to put water in it every once in a while but I still hate the thought of having to give up on that motor.............. I'm sorta bummed.........................:-\ Jeff Sorry to hear that...been there. At least it's not a DD for you, is it? Adding water daily gets old fast, but as long as it's not mixing with oil, it could last a long time still. 1yr+ on mine, and it's still going strong in one of Scott's cars. Hope that makes ya feel better, Jeff...BUT NO MORE IDLING FOREVER AT WALKER! On another note, I'll hopefully be testing a shear-bolt axle next weekend. Anyone have a spare, just in case??? Link to comment Share on other sites More sharing options...
Scott in Bellingham Posted October 10, 2010 Share Posted October 10, 2010 Sorry to hear that...been there. At least it's not a DD for you, is it? Adding water daily gets old fast, but as long as it's not mixing with oil, it could last a long time still. 1yr+ on mine, and it's still going strong in one of Scott's cars. Hope that makes ya feel better, Jeff...BUT NO MORE IDLING FOREVER AT WALKER! On another note, I'll hopefully be testing a shear-bolt axle next weekend. Anyone have a spare, just in case??? come by this week I have one, also the new coupes almost done:) Link to comment Share on other sites More sharing options...
88Subi4x4 Posted October 10, 2010 Share Posted October 10, 2010 I think I blew the HG's in butters, it has the tale tale signs of it anyways, but I'm going to run it till its dead, I only have to put water in it every once in a while but I still hate the thought of having to give up on that motor.............. I'm sorta bummed.........................:-\ Jeff EJ IT!! Link to comment Share on other sites More sharing options...
brysawn Posted October 11, 2010 Share Posted October 11, 2010 I'm thinking about going to the meet-up before heading to walker, so I can meet some people. I've got a S/R push-button (haven't had a chance to put in my D/R yet) and I've been told those don't work to well at walker. Link to comment Share on other sites More sharing options...
SoobieDoo Posted October 11, 2010 Share Posted October 11, 2010 EJ IT!! Nah, I've seen his wiring before I'm thinking about going to the meet-up before heading to walker, so I can meet some people. I've got a S/R push-button (haven't had a chance to put in my D/R yet) and I've been told those don't work to well at walker. You could prob ride along too, if you like. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now