How do I do this??

[stephen115]

I want my brat to be low like this one and also what is up with these rims? exspecially the ones in the back? What kind are they?

 

[Gloyale]

Looks like a stock brat w/ redrilled 14' or 15" chevy sixlugs w/ low profile rubber.

[stephen115]

Looks like a stock brat w/ redrilled 14' or 15" chevy sixlugs w/ low profile rubber.

 

 

How is it level? mines not level at all.

 

SJ

[Gloyale]

It's not. The angle is deceptive from picture.

 

It's called "forced perspective"

 

There is however an adjustment on the rear torsion bar and the front spring seats.

[stephen115]

It's not. The angle is deceptive from picture.

 

It's called "forced perspective"

 

There is however an adjustment on the rear torsion bar and the front spring seats.

 

I knew about the rear adjustment but I didnt know about the front, thanks ill try the front and see if it levels out.

 

SJ

[GeneralDisorder]

If you raise the front using the strut spring perch adjusters (if it still has them - many have been replaced with non-stock struts) it should only be done for off-road as it will create a positive camber situation and will rapidly wear out your front tires on the road (outer edge wear - especially on turns).

 

The rear adjust is safe to use anytime but the front should be left fully down unless you are not on the pavement. EA81's already have a tendancy to wear the outer edge of the tires in turns - jacking up the struts will just make it that much worse.

 

If you want to level it a 1" lift on the front only would come pretty close to doing that but with such a small lift camber correction is not easily done.

 

GD

Edited October 19, 2010 by GeneralDisorder