Cup O Noodles Posted October 20, 2010 Share Posted October 20, 2010 I'm going to order a Weber with a manual choke from carbsunlimited.com. It's going in my '87 GL. How to you run the choke lever (or linkage, I don't know the proper term) through the firewall? I was also thinking about ordering the water choke instead. They aren't a big deal to hook up, are they? It seems like it would just be one in hose and one out hose. Thanks. Link to comment Share on other sites More sharing options...
Loyale 2.7 Turbo Posted October 20, 2010 Share Posted October 20, 2010 Yes, Water Choke is not a Big Deal, but Could I Ask Why Don't you Order the Electric Choke Version? Link to comment Share on other sites More sharing options...
Cup O Noodles Posted October 20, 2010 Author Share Posted October 20, 2010 From what I've read the water choke is more accurate than the electric choke. I wouldn't mind having the electric but the water choke is only 10$ more. Link to comment Share on other sites More sharing options...
ShawnW Posted October 21, 2010 Share Posted October 21, 2010 It might be but then you have an additional coolant line to run, break, and deal with. The electric is already there with a factory wire you can use and most of the ones I have done or seen utilized the spade from the factory harness. Link to comment Share on other sites More sharing options...
subiemech85 Posted October 26, 2010 Share Posted October 26, 2010 I vote for the manual choke use a cable Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now