87glsubie Posted April 9, 2011 Share Posted April 9, 2011 if they wher that big and chrome id be dissapointed but i think if you murdered that thing out those wheels would look frickn sick on there Link to comment Share on other sites More sharing options...
987687 Posted April 9, 2011 Share Posted April 9, 2011 There's something weird with that rim... It looks like the lip is broken off on the bottom back by the ground. Link to comment Share on other sites More sharing options...
subaruguru Posted April 9, 2011 Author Share Posted April 9, 2011 Very good i was waiting for somone to catch it yes that rim is junk its just for fitting there is about 4 inches of bead missing. I agree the chrome is just way too much but with them murdered out i think they will look very nice Cheers R. Link to comment Share on other sites More sharing options...
Phizinza Posted April 10, 2011 Share Posted April 10, 2011 Well done on the BRAT mod, I like how you are trying to follow the lines of the original. Can't say I like the styling of those EA82's or those wheels you have chosen but I'm sure you'll enjoy the car once it's done and while it's getting done! here it is.... I've seen this car in person, well just before it was running and on the road. It was on the hoist getting the 5 stud brakes wheels etc. http://www.risingsuncarservice.com.au/index.php Those are the guys who built it. Radiator was in the back between the roll bar up against the rear window with two thermo fans. I think it was just a WRX radiator or something. It was kinda cool, but honestly with the wheels they chose (to keep offset as close to Brumby factory offset) and the standard Aussie bullbar but no lift it looks kinda boring. I'm sure it went well though. Link to comment Share on other sites More sharing options...
archemitis Posted April 11, 2011 Share Posted April 11, 2011 a 6 cylinder in an ea? weird... :-\ Link to comment Share on other sites More sharing options...
Numbchux Posted April 11, 2011 Share Posted April 11, 2011 a 6 cylinder in an ea? weird... :-\ Yea, I wonder if anyone's every done that before Link to comment Share on other sites More sharing options...
subaruguru Posted April 11, 2011 Author Share Posted April 11, 2011 lawlz:lol: Cheers R Link to comment Share on other sites More sharing options...
subaruguru Posted April 12, 2011 Author Share Posted April 12, 2011 Well had to swap over the front struts from XT6 to legacy because they fit the wider wheels. Pics when the sun comes up again it looks really cool. Cheers R. Link to comment Share on other sites More sharing options...
subaruguru Posted April 12, 2011 Author Share Posted April 12, 2011 PICTARS!!! Just two but its better than nothing right? cheers R. Link to comment Share on other sites More sharing options...
987687 Posted April 12, 2011 Share Posted April 12, 2011 Both your wheels are on backwards Lookin' good! Link to comment Share on other sites More sharing options...
subaruguru Posted April 13, 2011 Author Share Posted April 13, 2011 yeah i noticed that haha but its just for test fitting. Cheers R. Link to comment Share on other sites More sharing options...
87glsubie Posted April 13, 2011 Share Posted April 13, 2011 any mods to the 3.3??? other than the b-a flames that are prolly good for like 10 horse "D hah jp those are way cool though Link to comment Share on other sites More sharing options...
Mugs Posted April 13, 2011 Share Posted April 13, 2011 Both your wheels are on backwards Lookin' good! Actually his wheels are installed correctly, but the tires are mounted backwards on the wheels...just sayin. Link to comment Share on other sites More sharing options...
987687 Posted April 13, 2011 Share Posted April 13, 2011 Actually his wheels are installed correctly, but the tires are mounted backwards on the wheels...just sayin. :lol: Tires that low profile are a wicked biotch to mount... I've done a lot of swearing trying to get rubber bands onto rims where I work... Link to comment Share on other sites More sharing options...
subaruguru Posted April 14, 2011 Author Share Posted April 14, 2011 Yes blame the tire place i put the wheels on right they are the ones that messed up rofl:lol: No mods to the 3.3 yet i need to get it up on a stand and pull the heads off i got a deal on the motor becasue it had a leaky HG (thanks Justin i ow you man) I got to drive the SVX befor the engine was pulled:burnout: i think the engine will be just fine the way it is. Later on down the road i might feel differently but for know i think the stock EG3.3 has plenty of muscle to throw this brat around Cheers R. Link to comment Share on other sites More sharing options...
87glsubie Posted April 15, 2011 Share Posted April 15, 2011 agreed.... hah sweet deal Link to comment Share on other sites More sharing options...
Pooparu Posted April 29, 2011 Share Posted April 29, 2011 Is this thing up and running yet? Link to comment Share on other sites More sharing options...
subaruguru Posted April 30, 2011 Author Share Posted April 30, 2011 lol not quite still saving up the money to get the harness cut. but i will be pulling the eg apart here soon so i can get going on the HG,TB,WP stuff replaced i dont want any problems after i get this baby stuffed in there. Cheers R. Link to comment Share on other sites More sharing options...
Pooparu Posted April 30, 2011 Share Posted April 30, 2011 Oh trust me in that I tell you that you'll have problems. When you've done as much work as you've done to this ride you're going to have bugs and problems to work out with it. I'm still working the bugs out of my swap stuff on my hatch. It's rewarding and frustrating at the same time. I really hope to see this at the WCCS this year. I'm definitely voting it as my best of show winner. Link to comment Share on other sites More sharing options...
subaruguru Posted May 1, 2011 Author Share Posted May 1, 2011 Thanks earl and i do expect the bugs :-\ lol like you said with this much work there is no avoiding it. My goal is to have it at the show this year. She wont be pretty but she will be driving on her own power i hope it will be a crowd favorite. Cheers R. Link to comment Share on other sites More sharing options...
subaruguru Posted May 8, 2011 Author Share Posted May 8, 2011 Sorry my posts have come to a halt everyone i recently moved with my gf and have stuff scattered all over but i will be making progress on it in one way or another. cheers R. Link to comment Share on other sites More sharing options...
capn_r Posted May 9, 2011 Share Posted May 9, 2011 Don't lose track of my grill. We will connect sometime. Link to comment Share on other sites More sharing options...
subaruguru Posted May 9, 2011 Author Share Posted May 9, 2011 lol i still got it for ya Link to comment Share on other sites More sharing options...
subaruguru Posted May 30, 2011 Author Share Posted May 30, 2011 ok well going in another direction with this build the engine going into it now is a JDM EJ 2.0 with a beautiful set of twins if you catch my drift thats all for now cheers R. Link to comment Share on other sites More sharing options...
carfreak85 Posted May 30, 2011 Share Posted May 30, 2011 (edited) Time to change your custom title? "EG JUST KICKED OUT YO!!" Edited May 30, 2011 by carfreak85 Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now