eVIL_NTT Posted October 26, 2010 Share Posted October 26, 2010 I found this under the heading for boot kit: "Some models may experience overheating of inner boot leading to premature failure. This is mainly due to exhaust system modifications. To solve this problem, use EMPI boot 86-2298-D, which is made of heat resistant silicon material." Link to comment Share on other sites More sharing options...
renob123 Posted October 26, 2010 Share Posted October 26, 2010 I found this under the heading for boot kit: "Some models may experience overheating of inner boot leading to premature failure. This is mainly due to exhaust system modifications. To solve this problem, use EMPI boot 86-2298-D, which is made of heat resistant silicon material." Interesting. I don't recall seeing that in the catalog when I looked about 1.5 years ago. I wonder what the tradeoff is. For example, is the heat resistant stuff less flexible or durable or something? Or is the only tradeoff the presumably higher price? Jacob Link to comment Share on other sites More sharing options...
SubaRube Posted October 26, 2010 Share Posted October 26, 2010 I noticed those a few years back. Thanks for reminding me, my boot looks like it almost gone. It looks like it's starting to rip. Link to comment Share on other sites More sharing options...
eVIL_NTT Posted October 27, 2010 Author Share Posted October 27, 2010 Interesting. I don't recall seeing that in the catalog when I looked about 1.5 years ago. I wonder what the tradeoff is. For example, is the heat resistant stuff less flexible or durable or something? Or is the only tradeoff the presumably higher price? Jacob Well its the "new" 2010 catalog, I haven't looked at one in even longer than you. I would imagine the trade off is just price as silicon is pretty durable, but I haven't used them before so it's just a guess. Link to comment Share on other sites More sharing options...
TheLoyale Posted October 27, 2010 Share Posted October 27, 2010 Since this thread has popped up, How do you buy whole axles from EMPI? I looked at their 2010 online catalog and it only lists Inner or Outer joints. Also do they make 25 spline? All I see is 23 spline for M/T trannys. Link to comment Share on other sites More sharing options...
jboymechanic Posted October 27, 2010 Share Posted October 27, 2010 Tom, I bought those new EMPI axles that we installed on my GL-10 from partsgeek.com and they were complete assemblies. I would bet the silicone is great, I know they are heat resistant as more and more kitchen hardware is being replace by soft silicone. For example, my wife has a silicone muffin pan for baking. I believe they are okay for up to 600 degrees F of continuous exposure! Link to comment Share on other sites More sharing options...
TheLoyale Posted October 27, 2010 Share Posted October 27, 2010 But finding axles in 25 spline is the hard part.. I guess A1 makes 25 spline axles, but are they good axles? Tom, I bought those new EMPI axles that we installed on my GL-10 from partsgeek.com and they were complete assemblies. I would bet the silicone is great, I know they are heat resistant as more and more kitchen hardware is being replace by soft silicone. For example, my wife has a silicone muffin pan for baking. I believe they are okay for up to 600 degrees F of continuous exposure! Link to comment Share on other sites More sharing options...
jboymechanic Posted October 27, 2010 Share Posted October 27, 2010 EMPI 25 spline axles are the 4th axle listed in the link below: http://www.partsgeek.com/catalog/1987/subaru/gl10/driveshaft_-ar-_axle/axle_assembly.html Link to comment Share on other sites More sharing options...
TheLoyale Posted October 27, 2010 Share Posted October 27, 2010 WHAT!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! No other parts house site lists the 25! WOW thank you Soooo much Jon! I am totally gonna order two of them when I get paid so they don't just so happen discontinue them. Again thank you! EMPI 25 spline axles are the 4th axle listed in the link below: http://www.partsgeek.com/catalog/1987/subaru/gl10/driveshaft_-ar-_axle/axle_assembly.html Link to comment Share on other sites More sharing options...
jboymechanic Posted October 27, 2010 Share Posted October 27, 2010 It's funny as those are the axles that I almost bought, but didn't after doing some more reading as my transmission is not the original. I found that I had to order the 23 splines form my car since I have a non-turbo trans. You're welcome, it's about time I could help you with something Tom. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now