84 GL Ignition Help

[Resortx]

Alright so I have got an 84 Subaru GL that the ignition is completely destroyed in.So I have the back half of the ignition out and I start it with a screwdriver everytime I drive it. the area I live in is pretty bad on car theft and I want to wire the ignition so it is a little less likely to get stolen. I dont want to just replace it because with stock ignition it is a piece of cake to steal..

 

What I have decided on is wiring up a switch ran to my accessory and On/off halfs of my ignition to turn power on and off and a momentary push button for my starter... and run all of the wiring with black wire to my relays and wire it up hidden under my dash or inside of my glove box and locking my glovebox.

All wire will be hidden and ran through the back of dash.

Goal is that if they hop in and see the wiring disaster under the dash of all black wires they will just say forget it.

 

also Ive considered just wiring up a remote start system straight to my relays and forgetting all of my switches... or I could wire it up with my switchs...

 

Problem is would a remote start system work like that? all I need is a remote 12v to trigger my relays that will be 12v constant until I shut it off with my remote?

 

I also keep a steering wheel lock on it also.

 

What would you guys do? Im kind of leaning towards the remote start.

But how would I get it to work?