Jump to content
Ultimate Subaru Message Board

Recommended Posts

You need to ensur your doors have the electronic locks. If not, you will need to install the aftermarket actuator.

 

My car has central locks. I flip the switch on the driver's side and they all react, etc. I'm just wondering where this thing would even go. I know it's under the dash in the driver's side foot well, but will there just be a cable hanging out there? Do I have to pull it from something else?

 

And now that you mentioned ensuring my car has the electronic locks- did some of the '95 Legacy's not have electronic locks? I have another 95, but it's a Legacy L and the locks don't react to the driver's switch.

Link to comment
Share on other sites

The wire is all behind the kick panel and the unit itself goes up under the dash. held in with zip strips. I have a used unit and the wiring, so you would just have to get the remote. You can order them off Ebay for about $15.

 

Yes, not all Legacy's came with the electronic locks.

 

If all your doors are opening and closing off the switch, you should be OK.

 

$50 shipped.

Link to comment
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
 Share

×
×
  • Create New...