ettev Posted December 1, 2010 Share Posted December 1, 2010 Is it possible to take these things apart to get them working again? If so, how? I have one that is fully unrolled and the return springs aren't pulling it back in. It's in an EA81 wagon so they're not that easy to find anymore. Anyone? Link to comment Share on other sites More sharing options...
SubaRube Posted December 1, 2010 Share Posted December 1, 2010 I fixed mine a few years back, I found my old post explaining how I did it. Here ya go - It's really easy. Take off the end caps. I used a nail to punch the pins out.Roll it up and throw a rubber band on it. Take some vise grips and twist the spring up nice and snug, don't twist it so much that it breaks the spring. Now with the tension on, have someone hold the vise grips while you put the opposite end cap back on. Once the pin is back in the end cap, you can release the vise grips. Voila! Link to comment Share on other sites More sharing options...
ettev Posted December 3, 2010 Author Share Posted December 3, 2010 Thanks man. I'll give it a try over the weekend. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now