idosubaru Posted December 6, 2010 Share Posted December 6, 2010 Looking to replace orings and schrader valves to seal up EJ stuff. Anyone have the valve sizing info or tips? I did back in maryland but that place had bins of parts, don't think these places in WV have quite that kind of selection last I checked. Link to comment Share on other sites More sharing options...
Fairtax4me Posted December 6, 2010 Share Posted December 6, 2010 You might be able to find O ring sizes on one of the online OE parts sites. We have some valves in our parts bins at work but I don't think any will fit Subaru stuff. :-\ Link to comment Share on other sites More sharing options...
idosubaru Posted December 7, 2010 Author Share Posted December 7, 2010 orings are easy - i got enormous amounts of those. i've got two huge packs of those. interested in the schrader valves. are there many different sizes or just a few? got my tools loaded, i'm just going to remove one in the parking lot and see. Link to comment Share on other sites More sharing options...
ShawnW Posted December 7, 2010 Share Posted December 7, 2010 I went through this and ended up just using some used ones off used A/C hoses that we had lying around the dealership. Honestly they don't need to be replaced any more often than the actual hoses in my opinion. Link to comment Share on other sites More sharing options...
Fairtax4me Posted December 7, 2010 Share Posted December 7, 2010 There are several that I've seen. I'm not sure what the actual size measurements are, but there are definitely some much larger than others. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now