Crawlerdan Posted December 22, 2010 Share Posted December 22, 2010 hello- some of you may remember me looking for saggy butt spacers for my 91 legacy, there are none as most of you know. it was either a full blown 4 inch lift like SJR sells, or re drill your towers in the rear to accept other legacy struts. Well -im working on a solution that will satisfy the others that are simply looking for a little ummpphh for larger tires, a little extra ground clearance, etc. ive contacted a local machinist-and we are making strut top spacers for the first gen legacys what i want from yall is- what sizes are most appealing for you? i plan on offering a few sizes the first run will be 7/8 inch spacers, and longer studs-for the front and rear. this will lift all 4 corners material is 6061 t-6 aircraft grade structural alluminum i was thinking maybe a 1/2 size, and a 3/4 as well. what does everyone think? when i get the first run i will post up pics and install on my 91 please let me know what size you would be interested in, and what you think a fair price for 4 spacers and a set of hardeware is Link to comment Share on other sites More sharing options...
WoodsWagon Posted December 22, 2010 Share Posted December 22, 2010 With all the non-outback subarus running around with outback struts in them, and not having allignment or axle problems, I'd say make the spacer the same height as the outback subframe drop blocks. That way, you can run outback struts, with the factory subframe spacers installed, and then add your strut cap spacers in to get the extra clearance you have on a non-subframe spacer-ed car with outback struts. Link to comment Share on other sites More sharing options...
Crawlerdan Posted December 22, 2010 Author Share Posted December 22, 2010 that may come later, at this point, we are offering a product similar to subtlesolutiuns.com spacers but we are filling a void in the market Link to comment Share on other sites More sharing options...
Fairtax4me Posted December 22, 2010 Share Posted December 22, 2010 it was either a full blown 4 inch lift like SJR sells, or re drill your towers in the rear to accept other legacy struts. No need to re-drill if you swap the top hats from your old struts. There are spring options for a little extra lift. Pretty sure the Forester springs were a bit taller than Legacy. I've read of a few combinations of different struts and springs from the Outback and Forester that give the best lift on stock / junkyard parts. There are a few companies out there that make lift springs as well, but they're $$$. Spacers might be a winner for the right price. Link to comment Share on other sites More sharing options...
bru73 Posted December 22, 2010 Share Posted December 22, 2010 outback springs and struts will lift a first gen anf so will forester struts and springs Link to comment Share on other sites More sharing options...
Crawlerdan Posted December 22, 2010 Author Share Posted December 22, 2010 thanks guys, we are all aware of this, for example, i already have forester struts, and springs on my 91- this is about strut top spacers-debate over Link to comment Share on other sites More sharing options...
LegacyBrad Posted December 22, 2010 Share Posted December 22, 2010 (edited) If the price is right and they are at least 1" I would by them for my Leggy. Sorry, but 1/2"- 7/8" is not enough to justify my purchase. I suppose 150 + shipping would be about right. Would be a nice combo to go with taller struts. Keep me updated. If you are really going to pull it off, I'm down. Edited December 22, 2010 by LegacyBrad Link to comment Share on other sites More sharing options...
Crawlerdan Posted December 22, 2010 Author Share Posted December 22, 2010 ok- thanks you-7/8 inch will be the first run...cause we got a deal on the material but if there is enough interest- we can make them whatever you want Link to comment Share on other sites More sharing options...
Buick350X Posted December 23, 2010 Share Posted December 23, 2010 I would think it would be best to make it stackable, you get the base standard, then buy the stackable spacers as needed to adjust height. you would want a 1/2" and a 3/8" spacer Link to comment Share on other sites More sharing options...
TheLoyale Posted December 23, 2010 Share Posted December 23, 2010 I think this is one great idea! And I agree with Buick350 on the stackable thing, that would be cool and easy for adding more lift down the road. I have Outback struts with Forester springs, it would be cool to lift it even more with this. I am all for it, as if you couldn't tell -Tom Link to comment Share on other sites More sharing options...
Crawlerdan Posted December 23, 2010 Author Share Posted December 23, 2010 thanks tom- my machinest is bringing a pre production piece over today for a test fit, before he sets up teh mill Link to comment Share on other sites More sharing options...
johnceggleston Posted December 23, 2010 Share Posted December 23, 2010 outback struts fit on legos with out steering, alignment, or axle problems. and outbacks have body lift blocks on them that the legos don't have (95 - 99 at least). so you could lift outbacks ~2'' to ~2.3"(?) or so before you run into trouble. likewise, you could do all the same stuff to a lego, OB struts and blocks, and strut top lifts, gaining 4'' or more. are the outback body lift blocks 2 inches, has any one ever measured them? Link to comment Share on other sites More sharing options...
Crawlerdan Posted December 23, 2010 Author Share Posted December 23, 2010 they are about 1.5 inches Link to comment Share on other sites More sharing options...
TheLoyale Posted December 23, 2010 Share Posted December 23, 2010 Yep 1.5", I looked at one in the junkyard. Link to comment Share on other sites More sharing options...
johnceggleston Posted December 23, 2010 Share Posted December 23, 2010 so 4 inches may be the max to expect on a lego without other modifications. Link to comment Share on other sites More sharing options...
TheLoyale Posted December 23, 2010 Share Posted December 23, 2010 4" is pretty much for most folks, its better then stock! I think I would like to squeeze one more inch outta the Legacy and call it good, I really don't want to drop down control arms and everything, so this is a nice option. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now