oleman77 Posted January 30, 2011 Share Posted January 30, 2011 I have a strange problem. I have been working on a 77 ea71 and had it running. Started working on headlights as they were not working. Began with fuses, they were fine. Looked at wiring at light switch but was unable to find problem. Anyway when I tried to start engine to move the car it wont stay running. After messing with it for a while I noticed that it runs but as soon as the key went to the run setting it would die. I restart it and it runs but will only stays running if i keep the key to the right of the run setting but not quite to the start setting. Its a strange issues....any ideas??? Link to comment Share on other sites More sharing options...
NorthWet Posted January 30, 2011 Share Posted January 30, 2011 A couple probabilities come to mind, the first being a bad ignition switch. It is very common to have contact issues in the ignition switch. The other possibility is either a bad ignition ballast resistor or the ignition wiring running to the "run" side of the resistor (as opposed to the coil-side that bypasses the resistor). (This is a bit of speculation, as I can't remember for sure if the EA71 uses a separate ballast resistor.) Link to comment Share on other sites More sharing options...
Datsunrides Posted January 30, 2011 Share Posted January 30, 2011 +1 on the switch. Take a look at the back. They sometimes work loose from the lock cylinder. Mark Link to comment Share on other sites More sharing options...
oleman77 Posted February 13, 2012 Author Share Posted February 13, 2012 BTW it was a loose fuse believe it or not. Just had to squeeze the metal ends and that took care of the problem...pete Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now