Jump to content
Ultimate Subaru Message Board

Recommended Posts

Ok I have a customer with a 99 OBW 2.5, 5speed,130,000. The issue is that when the car warms up it starts to miss(real bad). It feels like a bad wire. The only code is a cam positon sensor code. replaced the sensor 2x with good used ones. Still missing. Any thoughts? Thanks,Craig

Link to comment
Share on other sites

Oddly enough. I just had one doing the same thing, but it was a 97 GT wagon. Had a pretty decent miss to it, and a Cam sensor code. After playing around with it for a little, I swapped out the ignitor and it took care of the problem. Might be worth a try if you have one laying around.

Link to comment
Share on other sites

For me it was the module, the one mounted to the firewall in the center. I mean, it's odd considering I only had the cam sensor code. But I had tried different cam and crank sensors, but still had the miss (no codes for that), tried a coil. Last I changed the ignitor and that took care of it.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...