logic23 Posted February 4, 2011 Share Posted February 4, 2011 Started a new thread for easier searching later. What are peoples votes for transmission pan sealant? Link to comment Share on other sites More sharing options...
Fairtax4me Posted February 4, 2011 Share Posted February 4, 2011 Ultra grey. But if there is one available I will use a formed gasket before sealer. Sealer is just such a PITA on a trans pan. Link to comment Share on other sites More sharing options...
logic23 Posted February 4, 2011 Author Share Posted February 4, 2011 especially if you have to take it back off... I used high temp red but it seemed to no dry in the valleys of the sealing edge on the pan... lack of o2? Link to comment Share on other sites More sharing options...
Luvn737s Posted February 4, 2011 Share Posted February 4, 2011 Permatex Right Stuff. Works great and easy to use. Link to comment Share on other sites More sharing options...
bstone Posted February 4, 2011 Share Posted February 4, 2011 Permatex Black to help hold on the gasket. Link to comment Share on other sites More sharing options...
gregB Posted February 5, 2011 Share Posted February 5, 2011 When I did mine, used thin layer of Permatex Black on the pan to tack the neoprene gasket in place. Careful not to over torque bolts. Has not leaked yet, + 4 weeks from install. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now