Suba_GL_87 Posted February 18, 2011 Share Posted February 18, 2011 my car is subaru gl 87' 1.8L. my wagon have badly oil leak from head gasket and there's muddy oil when i parking lots. those made me headache buy new oil pint turn over again. im fed-up and buy new head gasket. anyways; when i was remove a valve cover and there have a cam-lobe. so, i try remove a block of the cam-lobe. it's hard to remove also stuck. But somehow the cam-lobe's valve's a part fell down made me very anxious (look like a *rectangle with sliver there a hole* for support valve to cam-lobe) i don't know what called it. so, i did struggle a little longer try to put back away but helpfully i put some sticky grease on valve between cam-lobe and go back together. so, i've been looking around internet and try think how to replace head gasket. :banghead: feedback me! Link to comment Share on other sites More sharing options...
Dirk Posted February 18, 2011 Share Posted February 18, 2011 Some pics please? This might help us help you. Link to comment Share on other sites More sharing options...
nickolai Posted February 18, 2011 Share Posted February 18, 2011 You might try getting a repair manual, Chilton, or Haynes. They have pretty good step by step instructions for most repair procedures. If you want I could scan the pages dealing with head gaskets and email them to you. Link to comment Share on other sites More sharing options...
Suba_GL_87 Posted March 8, 2011 Author Share Posted March 8, 2011 already have a friends who help me for put new head gasket. yea, there have a suba manual book of wagon 87 1800. thanks! Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now